UNSOLVED

indigox3

updated

21 years ago

I

indigox3

1 Rookie

•

11 Posts

0

10091

June 22nd, 2005 19:00

2001FP Display Problem

Hi

I have a Dell 2001FP 20" LCD monitor, and a nVidia Quadro FX 3400 video card with dual DVI outputs. The monitor is attached to the video card via a DVI cable.

I am running Windows XP SP2.
I have updated the drivers for the video card and the monitor.
My display settings are 1600x1200 resolution, 60hz refresh rate, 32-bit colour depth.

Every so often my monitor will "blank" out. The screen will go completely black for a split second, then it will return to normal. The "blanking" will continue every few seconds intermitently. The only solution I have found is to use a 16-bit colour depth or a lower resolution, however these are not acceptable long term solutions.

Any help with this issue would be appreciated.

Thank you.
  • Hellman

    1 Message

    210

    0

    Posted September 13th, 2005 17:00

    Did you figure this issue out?  I'm having the same problem - my video card is an eVGA nVidia 6800GT.  It only blanks out at 1600X1200 - if I drop it down to 1280x1024 it doesn't happen.
  • indigox3

    1 Rookie

    •

    11 Posts

    210

    0

    Posted September 15th, 2005 12:00

    The only solution I found was to replace the video card.

    You could also try subsituting the monitor or DVI cable with ones that you know work on other computers.

    Hope that helps.