UNSOLVED

lHashl

updated

16 years ago

L

lHashl

6 Posts

0

18177

December 24th, 2010 12:00

Best replacement mobo for ALX?

Hey i was just wondering if anyone would know the most similar motherboard to the one that is currently in the Aurora ALX destop, i am asking because i am tired of the poor support i recieve from Dell and also tired of having a $5000 machine just sitting there in the corner collecting dust. I know it will void my warranty but i feel i don't have much of a choice anymore. Any advice is greatly appreciated, i plan on taking system in to my nearest computer store after christmas.

  • Throxx

    10 Posts

    1331

    0

    Posted December 25th, 2010 17:00

    Let me say that I'm a new AW user so I could be wrong.  But if nothing else this thread will get a nice bump so someone more qualified can help you.  However, I do believe that most Alienware systems have "proprietary" motherboards.  What that means is you can't get get an aftermarket motherboard that will suffice.  If you do find one however, you wont be able to connect to your MIO Board (I think its called) which controls your custom lighting and your motorized front panel .

     

    I fear you you might be better off with Dell's support.

  • primetimex

    71 Posts

    1331

    0

    Posted December 27th, 2010 19:00

    Erm I'm afraid ur stuck with Dell - this has already been covered in another thread - albeit for Area-51 machines but it also applies to your Aurora.

    You're stuck with the Dell board since the MIO relies on it for proper operation of the lights fans sensors, without it none of those would work properly (if at all)

     

    You can probably put in a third party mobo but I'm afraid you'll have to find some way to get those lights fans and sensors working

  • m3th0d1c4l

    265 Posts

    1331

    0

    Posted December 27th, 2010 19:00

    Actually, with the latest update to the Command Center, some users with aftermarket motherboards report it working properly. I dont know if all boards will work fine or not, that is something you will have to try and see.

    I had swapped my Area 51 ALX with an EVGA Classified, and it worked for the most part with some problems of getting the board to detect the MIO board. I believe it has been fixed with the recent update to the firmware and software of Command Center.

    The only way to see how well it works is to try it yourself.

  • Sajin1337

    2 Intern

    •

    406 Posts

    1331

    0

    Posted December 27th, 2010 20:00

    nice choice m3th0d1c4l, evga for the win.

  • m3th0d1c4l

    265 Posts

    1331

    0

    Posted December 27th, 2010 21:00

    Yea that was my choice originally. This was about 2 or 3 months ago though....before the new CC was released. I ended up selling the board though because I couldnt get it to work properly.

    Since then though, I have built my own rig with a Rampage III Formula and 12GB of Dominator GT's in an 800D. I just pulled the 980x out of my Alienware along with the video cards and HDD/DVD drives and added them in.

    Another user here that I know has an Asus Rampage III extreme and another has the Classified, and they reported the same problems I had when I swapped my motherboard back then. Since the new CC release, both of them no longer have issues using an aftermarket board. Command Center works properly. So I would only assume that it would also be ok with the Aurora. The other thing you will lose is the automatic activation of Windows. You will have to enter the Windows Serial manually if you use an aftermarket motherboard.

    I wish I had kept the Classified so I can use it in the system now, but I have built a better rig without problems, and at this point, its not cost effective. I will probably mod this Alienware a bit more in the future when I get some more money though.

    I would say the ASUS Rampage III Gene or the EVGA X58 Micro would be a great board to swap into the Aurora ALX imo. The best you can do is try and see how it works.

  • Sajin1337

    2 Intern

    •

    406 Posts

    1331

    0

    Posted December 27th, 2010 21:00

    Glad to hear your no longer having issues.

  • lHashl

    6 Posts

    1331

    0

    Posted December 28th, 2010 17:00

    I will probably survive without all the bells and whistles of having lights in inside my case, i just want my high performance machine back online.  I am from Canada and Dell has really given me the runaround as to getting me a replacement board, almost seems like they are non-existent, so i feel i have no choice but to replace my board, thanks all for the input i will research these boards and hopefully they will be compatible with the Aurora.  P.S. i had already ordered a board but i keep getting emails saying it is still in production and i have to phone them to keep the order from getting cancelled. I love the dell machines but the service has just gotten worse. 

  • Sajin1337

    2 Intern

    •

    406 Posts

    1331

    0

    Posted December 29th, 2010 01:00

    return your alienware and buy a diffrent pre built pc or build your own. why risk $5000?

    To get your money back you will have to give them a really really really hard time, but it's doable.

    Good Luck.

  • primetimex

    71 Posts

    1331

    0

    Posted December 31st, 2010 09:00

    I wonder if my Gigabyte X58A-UD5 would work now with the latest CC update 2.6.1.0 - as far as I know Gb boards is one of the very few (maybe the only board) to have the FP pinouts compatible with the AW's FP block without needing any further mods.

    Currently my AW is nicely running along with an i7 960 inside it along with a HD6970 and no problems with fans, lights etc so I think I'll leave it as is, but thanks for the information!

    What was wrong with your AW anyway M3TH0D1C4L that you had to build your own rig?

  • jeffcmfrt66

    95 Posts

    173

    0

    Posted December 31st, 2010 10:00

    It would be awsome for anyone who had sucess with a aftermarket mainboard and the new CC with their Alienware to post the make and model of the mainboard along with any special task they had to do to get it to work.

    jeffcmfrt66