
UNSOLVED
Alienware X51 USB 3.0 ports run at 2.1/2.0 speed
Alienware X51 R1
Windows 7 64-bit
I have 2 USB 3.0 ports on the back of my desktop but when I plug my USB 3.0 External HDD into one of them, it runs at USB 2.1 speed. When I plug it in, the USB 3.0 Monitor shows a notification on the task bar saying: "This device can perform faster. This USB Mass Storage Device can transfer information faster if you connect it to a Super-Speed USB 3.0 port." I opened USBDeview and looked at the USB version of my External HDD and it is showing USB 2.1. I've already analyzed my system for updates and my drivers are all updated.
Responses (24)
Solutions (0)
Resurrectionist
119 Posts
3126
0
Posted November 4th, 2013 14:00
Try upgrading the FW -
http://www.dell.com/support/troubleshooting/us/en/19/KCS/KcsArticles/ArticleView?c=us&cs=19&docid=439267
Milena M458
6 Operator
•
2699 Posts
3126
0
Posted November 5th, 2013 07:00
Hello VincentA!
Have you tried different devices 3.0 on that port, to check if it’s the external hdd or if it’s the port the one that is giving you the issue?
Milena M458
6 Operator
•
2699 Posts
3128
0
Posted November 6th, 2013 09:00
Have you test the external hdd in another computer to check if you facing the same problem?
As a work around you can uninstall the 3.0 driver and download the latest version from www.support.dell.com
Are you definitely using a USB 3.0 cable? They are different, but you can use a 2.0 cable in a 3.0 device which would cause what you're seeing.
Also are you absolutely sure you're connecting to one of the blue 3.0 ports, as I never see this message unless I accidentally plug my 3.0 USB stick into the wrong one.
I think there is something wrong with my external HDD. My external HDD is connected to the computer and when I try moving files there, it takes awhile (a few minutes) to finish moving that item, even though the progress bar is full. Then, sometimes, it will disconnect even though it's plugged in. I replugged the external HDD to the USB 3.0 and it wouldn't detect it. I plugged the external HDD into a USB 2.0 port and it works fine, no freezing when moving files. When I plugged a USB 2.0 flash drive into the USB 3.0 port, it was detected and working fine. I will try and contact Seagate and see what they can do for me.

shesagordie
12 Elder
•
46017 Posts
3126
0
Posted November 3rd, 2013 10:00
Moving this thread to the Alienware Owners Club Forum.
Bev.