I Think A Solution 2 Your Problem Is Already Posted At http://linux.dell.com/wiki, If Not, That's The Website Where The Solution Will Get Posted Just As Soon As It's Available.
http://linux.dell.com/wiki/index.php/Ubuntu_8.04 Dell wiki Linux
3.4. Installing Windows driver
3.4.1. Installing Windows driver using ndisgtk (ndiswrapper graphical interface)
· If you chose to install ndisgtk, the graphical interface for ndiswrapper, after installation click on System | Administration | Windows wireless drivers and follow the instructions on-screen. For an idea of what to expect, some screenshots of ndisgtk can be found here.
If this works, and you have a network connection, then you can skip to Automatically loading at Startup - ndisgtk will load the driver if it installs correctly.
3.4.2. Installing Windows driver using command line
In a Terminal, run the following command:
· sudo ndiswrapper -i ~/drivers/drivername.inf
(assuming the driver is in a directory in your home folder called drivers, and is named drivername.inf)
ndiswrapper then copies the .inf and sys files into /etc/ndiswrapper/.... Don't forget that the filename you type in is case-sensitive.
3.4.2.1. Check to make sure the driver was installed correctly
Run the following command from a Terminal:
ndiswrapper -l
If the driver is installed correctly, you should see the following output:
Installed ndis drivers:
{name of driver} driver present, hardware present
or
{name of driver} : driver installed
device ({Chipset ID}) present
If you don't see this message:
a. Try a different driver such as the drivers for Windows 2000, or another driver matching the PCI ID on the ndiswrapper list.
b. This document has a troubleshooting section which may provide an answer.
c. Look for additional help. Read HowToGetHelp for more information.
3.5. Load the new driver module
If ndiswrapper correctly associates the driver to the wireless adapter, you are now ready to load the driver into memory, and try to establish a network connection. Open a Terminal and run the following commands:
· sudo depmod -a
sudo modprobe ndiswrapper
Then, also in a Terminal, check for error messages:
tail /var/log/messages
Alternatively, open a Terminal and try the commands ifconfig and iwconfig. Your wireless card should appear with an interface name of wlan0. If it doesn't appear here, then the driver is not working properly. If no errors are given, you should now be able to configure the network connection.
kevpan815
202 Posts
1710
0
Posted August 20th, 2008 09:00