hi all, I installed the alternate version of ubuntu 7.04 after the live cd wouldn't work with my vostro 1500. The installation was completed without a problem but when I restarted the computer to boot ubuntu as an OS a few things came up.
First off, a screen pop up saying there is a problem with the X server (my graphical interface) and that it was probably not set up correctly.
Secondly, an error message also popped up saying "bcm43xx: Error: Microcode "bcm43xx.microcode5.fw" not available or load fail"
Finaly, the main screen which I'm stuck in is asking me for my login info then my password. I tried typing my the login + pass I used during the set up and it didn't work.
I am a complete noob when it comes to linux.. I decided to try it after my friend kept telling me for months to get linux. XP was starting to really slow things down on a brand new laptop and thats not first time with a new dell that happens. Anyways, please help!! THANK YOU.
I have the bcm43xx requirement also. I notice the live CD regular install fails after the disc partitioning due to some network requirement (see the log file if you are interested). I get around this by putting the firmware in /lib/firmware by hand. You can use the pkg manager to do this as long as you have a wired connection. You will have to do it from the live CD for the install and then again from the hard drive boot to make it permanent. Alternately, you can `cp /lib/firmware/bcm* /mnt/sda1/lib/firmware` after you have installed while still running from the CD. Your hard drive mount location can vary.
I am not sure about the x server or why your login does not work. It appears there was a problem setting things up, I am surprised it boots at all, but then again you said it went well.
Well, I found a thread on the ubuntu forums specifically for the vostro 1500 Ubuntu installation.
After reading the first message detailing the specific and succesful way to install ubuntu, I tried it and failed. So I decided to save myself from a week of frustration and go back to XP for now.
There are just too many bugs here and there that need fixing after a proper installation.. and that's hard for me since I know very little about linux.
tssbc
14 Posts
157
0
Posted October 18th, 2007 14:00
7.10 has been released today. Maybe try that.
I have the bcm43xx requirement also. I notice the live CD regular install fails after the disc partitioning due to some network requirement (see the log file if you are interested). I get around this by putting the firmware in /lib/firmware by hand. You can use the pkg manager to do this as long as you have a wired connection. You will have to do it from the live CD for the install and then again from the hard drive boot to make it permanent. Alternately, you can `cp /lib/firmware/bcm* /mnt/sda1/lib/firmware` after you have installed while still running from the CD. Your hard drive mount location can vary.
I am not sure about the x server or why your login does not work. It appears there was a problem setting things up, I am surprised it boots at all, but then again you said it went well.
C