Latitude 7400 2-in-1: DW5821e cuskit cellular not qualified
The cellular network does not report coverage anywhere, even though I have installed the latest firmware updates from December and I am sure that there is great coverage around me (on 3G and 4G at least).
I have stumbled upon the cuskit tool (which strangely is not linked in the modems category for the 7400 2-in-1's drivers), but when executed, it just informs me that "The cuskit cellular module DW5821e is not qualified on this system. Please call Dell service center for assistance." and the checkbox is greyed out. I suppose that the unit is just not activated and working at all?
I disabled the hardware in windows settings. Some version of the custkit then bugged so that it could be executed, and ultimately I was able to unlock the modem.
I also tore the whole machine apart and re-cabled everything and I cannot say for sure if this was necessary as well. However, it's been working for a good while now (on linux).
The Latitude 7400 and 7400 2-in-1, despite the similar model names (Dell does this with the XPS models as well), are not the same system.
The 7400 2-in-1 is not on the list of supported systems if you look under "compatible systems" from the link you've posted.
Did this system come from Dell with the DW5821e card, or are you trying to add the card yourself?
On the XPS models, the internal architecture differs between the standard clamshell and the 2-in-1 (different mainboards); the same is very likely true for the Latitude 7400 vs. the 7400 2-in-1.
I appreciate you trying to help, but please carefully read what I am writing. I installed the correct driver that you've linked, which also lists support for the Latitude 7400 2-in-1. I did not install any wrong driver, and I did not even attempt to install the cust kit before the network did not work.
I do not see what my service provider would have to do with it. To me it is pretty clear that this is either a hardware or soft-/firmware fault. SInce the Cust Kit exists for other devices that use the DW5821e, why does it not exist for the 2in1 version? I'd guess that this should resolve the issue... oh well, I'll contact the support then, I guess.
Let's go back a step -- has the card ever connected to your PCS provider's network -- out of the box, before you started upgrading firmware?
You've also mentioned it "not reporting coverage" -- in which case another thing to check is the antenna connection to the card. If the antenna became disconnected, that's likely what you'd see happen.
item-
1 Rookie
•
10 Posts
3542
0
Posted April 3rd, 2022 03:00
@Selva7420
I disabled the hardware in windows settings. Some version of the custkit then bugged so that it could be executed, and ultimately I was able to unlock the modem.
I also tore the whole machine apart and re-cabled everything and I cannot say for sure if this was necessary as well. However, it's been working for a good while now (on linux).