We have two Latitude 5490 laptop's that appear to power save to a point where the screen goes blank, however they will not recover from this state - the only option is to press & hold the power button and then power back on.
The "Ignore Sleep" option is enabled in the BIOS. The Power Saving settings within Windows are to allow the screen to switch off after 30 minutes and NEVER go to sleep.
BIOS has been upgraded to the latest version 1.14 Tried to upgrade to the latest Display drivers listed on the Dell site - we're told these are not compatible with our system. So have tried the latest drivers directly from Intel - 27.20.100.8783 (29-9-2020). This has made no difference.
We've tried under Windows 10 Professional 1809 and also 1909 (our currently supported build and an old build to see if this was a Windows issue) - happens under both versions.
You leave the laptop plugged in. After 10 minutes (as per our settings) a screen saver kicks in. After approx. 10 more minutes the screen goes blank. No amount of key pressing, spacebar tapping, touchpad moving will being this laptop out of this state - the screen remains blank. We've also tried pressing the power button once - it does not appear to be in "sleep" so this also does nothing.
Press & hold the power button until the laptop switches off, power back up and everything is fine until the laptop once again goes back to a blank screen and we cannot recover it.
Thank you! We have received the required details. We will work towards a resolution via private messages to ensure the security of your information. In the meanwhile, you may receive assistance or suggestions from the community members as well.
this black screen issue is very known one and exists for 2 years already.
Can you please share with us the latest solution for this issue ?
I just tested it on 2 Dell Latitude 5490 - fresh 20H2 Windows Pro (pendrive with media creation tool) + latest drivers from Dell Command Update - both installed in the same network in the same time, just copy paste steps.
1 machine is working fine, there is no issues with waking it up after sleep, while second one sleeps forever, only keyboard backlight is working but I can only perform 10 second power button hold.
@DELL-Cares - Thank you for following up on the forum. I have 10+ Latitude 5490's with this issue. Numerous Sleep Studies have been submitted with no response. I will gladly supply any info you need for resolution. Thank you!
I bought a refurbished latitude 5490, latest bios update and drivers, I have experienced the same issue on windows 10 and then after the upgrade to windows 11. Should I contact dell support or this is hopeless and I return the product ?
This problem started occurring on my 5490 when I upgraded to Windows 11. However, the latest driver update for the Intel 620 UHD (30.0.101.1338) seems to have finally fixed it!
I've had this problem for 3 years now. As neworderofjamie states, it seems to finally be resolved in the latest graphics display driver from Dell. After I installed it my 5590 display wakes from black screen.
DELL-Cares
Moderator
•
27849 Posts
•
763 Points
3819
0
Posted October 12th, 2020 07:00
Thank you! We have received the required details. We will work towards a resolution via private messages to ensure the security of your information. In the meanwhile, you may receive assistance or suggestions from the community members as well.
#IWork4Dell
For all non-technical issues that require your private data, we must communicate via a private Direct Message
Dell Partner GEM Program, Out of Warranty Support options, No free goodwill repair, Get a copy of your Dell invoice