7320 Detachable - No Fingerprint scanner or front camera after motherboard
replacement
We have 5 of these new, one would not finish installing Windows 10. Could get to the desktop once or not at all and there would be a message about Windows not finishing the install and that the only account was disabled. All hardware test passed.
Anyway, after reinstalling Windows many times and a replacement SSD, then after a few months they replaced the motherboard. No I can finally install Windows 10 and all the Dell Command and MS Windows updates without it crashing.
But now I see that the Biometric Devices in device manager are missing and one of the cameras has an error.
The Goodix-Fingerprint-Sensor-Driver_J0XNT_WIN64_3.4.31.320_A03 fingerprint driver will not install saying device is not there and I can't get the camera to run.
They look ok, I don't think the one for the fingerprint sensor was touched. It goes into a small board that is on top of the sensor for the SIM card and power button.
The first pic is what the device manager should show for the Fingerprint-Sensor from one of the other 4 working tablets. The second pic is from the tablet with the issues.
There is also a miscellaneous devices section under the Integrated devices in the BIOS that has a check mark for the enable fingerprint reader device and it is set on all 5 tablets.
There is something else going on as I swapped the small power board and the fingerprint sensor from one of the good tablets, but this tablet still doesn’t see the fingerprint sensor.
The small power board and the fingerprint sensor from the bad tablet work fine in the good one. ???
They just put in a new motherboard with RAM, CPU and SSD. Then I swapped the power daughterboard and the fingerprint sensor. This tablet still can not see the fingerprint sensor. Maybe an issue with the ribbon cable from the motherboard to the daughterboard. ???
Tanquen1
2 Intern
•
61 Posts
1303
0
Posted March 8th, 2022 08:00
They look ok, I don't think the one for the fingerprint sensor was touched. It goes into a small board that is on top of the sensor for the SIM card and power button.