UNSOLVED

SESHIDANDA

updated

9 years ago

0

2260

April 23rd, 2018 04:00

how to check if all Isilon nodes are allowed to reach the ESRS server

Hi all,

Currently we are using ESRS server,we are planning to change the server , So before that we want to know that if all Isilon nodes are allowed to reach the ESRS server or not.Could please help me on this

  • crklosterman

    450 Posts

    1938

    0

    Posted April 23rd, 2018 09:00

    So you're just trying to see if all the nodes can get to the ESRS gateway?

    (As-in there is a firewall in the middle, and you want to verify that the rules are all correct?)

    You could do something simple like this:

    isilon-1# isi_for_array -s "ping -c 1 <> | grep loss"

    isilon-1: 1 packets transmitted, 1 packets received, 0.0% packet loss

    isilon-2: 1 packets transmitted, 1 packets received, 0.0% packet loss

    isilon-3: 1 packets transmitted, 1 packets received, 0.0% packet loss

    Of course that just checks whether ICMP traffic is permitted, you could substitute in perhaps a CURL command instead of ping, and specify the port number to be more specific about your attempt.

    ~Chris

  • 1937

    0

    Posted April 24th, 2018 02:00

    Hi Chris,

    Thanks for the information.

    I have tried the inputs which you given , I got update below like this :

    s940n0210-1# isi_for_array -s "ping -c 1 | grep loss"

    s940n0210-1: 1 packets transmitted, 0 packets received, 100.0% packet loss

    s940n0210-2: 1 packets transmitted, 0 packets received, 100.0% packet loss

    s940n0210-3: 1 packets transmitted, 0 packets received, 100.0% packet loss

    s940n0210-4: ping: sendto: No route to host

    s940n0210-4: 1 packets transmitted, 0 packets received, 100.0% packet loss

    s940n0210-5: ping: sendto: No route to host

    s940n0210-5: 1 packets transmitted, 0 packets received, 100.0% packet loss

    s940n0210-8: ping: sendto: No route to host

    s940n0210-8: 1 packets transmitted, 0 packets received, 100.0% packet loss

    s940n0210-1#

    s940n0210-1#

    s940n0210-1#

    s940n0210-1# isi_for_array -s "ping -c 1 | grep loss"

    s940n0210-1: 1 packets transmitted, 0 packets received, 100.0% packet loss

    s940n0210-2: 1 packets transmitted, 0 packets received, 100.0% packet loss

    s940n0210-3: 1 packets transmitted, 0 packets received, 100.0% packet loss

    s940n0210-4: ping: sendto: No route to host

    s940n0210-4: 1 packets transmitted, 0 packets received, 100.0% packet loss

    s940n0210-5: ping: sendto: No route to host

    s940n0210-5: 1 packets transmitted, 0 packets received, 100.0% packet loss

    s940n0210-8: ping: sendto: No route to host

    s940n0210-8: 1 packets transmitted, 0 packets received, 100.0% packet loss

    s940n0210-1#

    Whereas our current ESRS server ip addrees is  Y  but we got mail emc to change for ip addrss is X.when i have seen in oneFS ESRS tap.. I can see only Y is enabled .we dont have secondary ESRS.


    Below is EMAIL from EMC:

    I can see that that both Isilon systems are doing her Callhomes already via the old (Y) ESRS Server.

    Due to this ESRS backend will be shutoff in the end of the month I wanted to change the callhomes to the new ESRS server (X).

    But I cant see that the mails are coming to this server.

    Can you please check if all Isilon nodes are allowed to reach the ESRS server (X) with the following ports, please:

    And if this is not allowed, please request to get all these rules be applied.

    X-new IP address

    Y-old IP address.

       Isilon protocal to check.PNG.png

    Kindly suggest me chris ,how to do all these checks.

    Thanks & Regards,

    Seshi