UNSOLVED

dynamox

updated

9 years ago

D

dynamox

11 Legend

•

20419 Posts

•

87439 Points

0

2546

June 20th, 2017 05:00

Add cluster to IIQ 4.1.1.3 vApp

Hello guys/gals,

Has anyone recently deployed IIQ 4.1.1.3 vApp and added 8.0.x.x cluster to it ?  I am getting the following error message:

6-20-2017 8-21-19 AM.jpg

I am using SmartConnect zone name in the address field (system zone), no issues with name resolution from dig. I can use curl and successfully login to the cluster. I run tcpdump on IIQ vApp and then try to add cluster, i see absolutely no attempts from IIQ to do any name resolution nor attempt to make any connections.   Any thoughts ?

Thank you

  • 1058

    0

    Posted June 20th, 2017 14:00

    Hi,

    In my own lab (virtual), I've only used hard IP of specific nodes for InsightIQ connections.

    I'm seeking comments from Engineering on this.  I'll get back to you.

    Thanks.

  • 1058

    0

    Posted June 21st, 2017 12:00

    Hi dynamox,

    Response from Engineering is that SmartConnect is a tested/validated feature for IIQ.  As to why it is not working for you, we'd need to know the specifics of the environment.  Could you open a support case for this so Support could investigate?


    Thanks.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    1058

    0

    Posted June 21st, 2017 13:00

    Rob,

    i have an SR opened, 30 days into it and we have not gotten anywhere.  SR 07391024

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    1058

    0

    Posted June 21st, 2017 13:00

    have you tested IIQ vApp with your cluster ?

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    1058

    0

    Posted June 26th, 2017 12:00

    identified as bug

  • 1058

    0

    Posted June 26th, 2017 14:00

    Thanks.  I've been following the development in that SR.  The bug has been filed with Engineering.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    1060

    0

    Posted June 26th, 2017 20:00

    unfortunately in typical Isilon support fashion it was blamed on my network, until I pointed out what the issue was which had nothing to do with my network.  Very disappointing customer experience.

  • Eric_W1

    33 Posts

    1060

    0

    Posted June 27th, 2017 06:00

    Any chance there are underscores in the hostname? ( just ran into something similar on an unrelated project ).

    > Very disappointing customer experience.


    I have basically stopped opening tickets if at all possible due to the workload involved.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    1060

    0

    Posted June 27th, 2017 09:00

    Eric,

    no underscores, IIQ does not get restarted after changing network settings during IIQ deployment so it stays bound to loopback interface.

  • Brian_Coulombe_

    1 Rookie

    •

    107 Posts

    688

    0

    Posted June 27th, 2017 11:00

    Hmmm I have found that in cases where tickets are not responded I had to either hammer the SR owner or get in touch with our Rep and have them get on it.