
UNSOLVED
N
Neoplastic
5 Posts
0
2242
May 10th, 2020 03:00
Dell G5 5587 has severe performance issues in gaming.
Information about my Dell G5 5587:
Processor Intel(R) Core(TM) i5-8300H CPU @ 2.30GHz, 2304 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date Dell Inc. 1.12.2, 12/24/2019
GeForce GTX 1060
(If more information is needed to solve this issue, I will provide it.)
I always play games with the power plugged in. I use the Dell Power manager, and have it set to max performance. Still, at 70 degrees C, it randomly throttles for up to half a minute. The game will run perfectly smooth, and then suddenly drop to 10 - 15 FPS, and then revert back to smooth performance 60 FPS.
Games I've noticed this one include:
Dark Souls III (at lowest graphics)
Destiny 2 (at low graphics)
These aren't particularly demanding games. So a 1000 EUR laptop advertised for gaming should handle them easily. I'm not entirely sure what's going on. I've updated drivers and bios, yet it's making gaming practically impossible. It's odd, because it runs perfectly fine for a while, then randomly drops for no particular reason.
If anyone could help, I'd greatly appreciate it.
Responses (1)
Solutions (0)

Reven1010
42 Posts
1811
0
Posted May 10th, 2020 09:00
I got mine 5587 i5 8300+1060MQ November 2018 - I got issues as everybody, this laptop isn't very good, now I wouldn't buy Dell "gaming series" but you can make is usable. I had Couple of issues:
1. Idiotic fans behaviour - fixed with bios update, not an issue now (Dell Power Menagement, Fans on ULTRA)
2. CPU Thermal Throttling - there are 3 fixes, but one gives you the most. I did UnderVolting -0,400Volt so cpu got a lot less power ( less power=less heat in nut shell), UnderClocking to 3,7GHz (pains me to do so but games run maybe 1-2FPS worse than at 3,9GHz earlier but at least it is solid framerate), repaste - didn't do it laptop is still on warranty. Probably I won't ever do it. It is much more likely I'll sell mine this year.
3. GPU Power Limit Throttling - You need to adjust power curve of gpu in MSI afterburner. I got mine at 1860MHz Core at 0,880Volt - This is max OC and UV I can do, if I go 1861MHz i is limited by power of MAXQ design. Adding more voltage only makes it run hotter but it won't go above 1860MHz. Keep in mind, if you do something similar your card will be diffrent than mine (better :)?) never again MaxQ. I advise you to do the same. You can make your own "maxQ" by lowering voltage.
Try to use HWInfo to check if it got to high temps, maybe try AIDA64 to check if it throttles. Check on YT BobOfAlltrades - very easy guide to make it usable. Remember you are doing it at your own risk, but in my opinion it is very minimal risk.