I'm having the same issues. I have tried every driver available from Intel and Dell for this hardware. I was told the E1d65x64 is the correct driver for this model and Win10, but this has not been a solution for me. I have windows 7 deploying without issue, using the winpe 3.0 drivers. This has been an issue for three weeks and the only answer I can get from Dell is "This works in our environment" and "SCCM needs a Hotfix", even though I'm not even using SCCM.
Slowly it looks a Problem between Bios PXE Boot and the Communication to the Network Card.
The only Driver always on this series load by boot up are the kdnic. I can manually load the E1d65x64 Driver to get an IP then from the Network after i make a renew. But this does not help really.
driver is working, network is working but the NIC cannot give the right identifier over pxe boot to the Software to recognize the right for load and go on.
getting the same issue as well, have tried all the known drivers but not getting an IP address.
This looks similar to the issue we had with the E5440 and E5450 it where by the dell drivers didn't work at all and I had to import the intel drivers for the NIC.
I found that the Winx64\NDIS64\e1d64x64.inf was the one that worked (got an ip address when loading the driver via F8)
Have added it to the WinPE 10 boot image and can now get as far as being able to start the task sequence, haven't had chance to run through the task sequence so will update tomorrow on progress.
We applied this when we first got our E5470s and it worked, but we just recently got a new batch and have started to see this issue again but adding the latest network drivers doesn't seem to work. Our older E5470s still work.
Any one else see this and have a fix or work around?
So we have a ton of different dell model laptops and hp laptops. We are using Microsoft Deployment Services, Deployment Toolkit. I have injected every *** driver I could find on dells site related in anyway to this model laptop (E5470) and none have fixed the issue. We get to the point in PXE boot where you would normally enter your credentials for the deployment share but on this model it comes up with an error instead saying the following: "A connection to the deployment share (the actual path to our share which is right) could not be made. Connection ok, Possible cause: invalid credentials."
Okay so we haven't even entered credential info yet, it fails before it lets us enter them. it is "ONLY" this model that fails. ALL OF MY OTHER LAPTOPS PASS with no problems. I can image the others and capture them and everything else. This model no good. nothing...
PhilDela
2 Posts
13724
0
Posted April 29th, 2016 09:00
A solution work for me :
Go download this :
https://downloadcenter.intel.com/download/22283/Intel-Ethernet-Adapters-Connections-CD
Add driver in the folder \PRO1000\Winx64\NDIS65 (NDIS65 for Windows 10) (NDIS64 for Windows 8.1)
And to finish, integrate drivers into your image disque ( with MDT for me )