bhummerstone

updated

14 years ago

0

222615

November 28th, 2012 06:00

CCTK --valsetuppwd not accepting current BIOS password

Hi,

I'm trying to enable the Wireless LAN for a hundred or so D630 laptops using an SCCM task sequence. However, when I run the command cctk -i=D630BIOS.cctk --valsetuppwd=mypassword, I get an error saying "The setup password supplied is incorrect. Please try again."

I know that the most obvious answer is that the password is wrong, but it really isn't!

Any input would be great.


Thanks!

  • 14671

    1

    Posted December 4th, 2012 01:00

    Final update (hopefully!). I tried this with an older version of the CCTK (2.0) and it worked fine, so this appears to only be an issue with the latest version.

  • 14671

    0

    Posted December 3rd, 2012 01:00

    Nothing?!

  • 14671

    0

    Posted December 3rd, 2012 05:00

    Hi Bhummerstone,

    Can you please recheck if the setup password being used is valid for all the systems ?

    Also, let us know, which version of CCTK is being used ?

  • 14671

    0

    Posted December 3rd, 2012 06:00

    Hi,

    The password is the same on all of the systems, and is definitely correct for the test system I am just running the program on manually.

    It is the latest version of the CCTK - 2.1.1.

    Thanks.

  • 14671

    0

    Posted December 4th, 2012 00:00

    Just as another update, I've tried this on several laptops, all with the same password, and it doesn't seem to work.

  • 14671

    0

    Posted December 4th, 2012 01:00

    Thanks for the update.

    We shall investigate this.

    Can you please let us know, which all are the laptop models that are being used ?

  • 14671

    0

    Posted December 4th, 2012 01:00

    The laptops are Dell Latitude D630.

  • carminus

    1 Message

    14671

    0

    Posted February 28th, 2013 07:00

    This is odd, I found if you don't use the "=" at the end of "--valsetuppwd" it works.

    So, --valsetuppwd

  • 14679

    0

    Posted April 3rd, 2013 10:00

    I'm having the same issue with cctk 2.1.1 (137) on an Optiplex 745.  I'm unable to get the "valsetuppwd" option to work with either input file or a command line option.  For reference, I'm trying to set "wakeonlan=enable", but I've tried other options as well.  Every time I get the error described above.

    Unfortunately, leaving out the "=", as carminus suggests, doesn't seem to make any difference.

    However, found that the workaround for the "propowntag" issue (en.community.dell.com/.../1955.dell-client-configuration-toolkit-cctk-known-issues.aspx) does work.

    That is, if I want to run this:

    cctk.exe --valsetuppwd=PASSWORD --wakeonlan=enable

    I can instead run the following, and I don't get an error:

    cctk.exe --valsetuppwd=PASSWORD --setuppwd=
    cctk.exe --wakeonlan=enable
    cctk.exe --setuppwd=PASSWORD

  • 4584

    0

    Posted October 22nd, 2013 17:00

    This issue is still happening in cctk v2.2.0 (314).  

    The post has been marked as "Answered" but there isn't a real answer to the problem. Thankfully, the work-around from Josh works correctly, but it is a hassle to use.  Any other ideas when this might be corrected?

    Thanks,

    --------Mark