My system has a DVD-ROM, but I needed to be able to burn CDs. I could not find a replacement, but there was a DVD-RW from a E6410 model and it looked identical in the photo so I (naively) thought that it would fit.
After some adjustments to the outside of the unit, it did fit, but the BIOS insists on it being read-only.
I have not been able to find a relevant setting to that effect, at least not one that was meaningful to me.
Even so, the utility Disks (I am running Linux/Ubuntu) does recognize the unit as a DVD-RW.
Any firmware is only going to be able to use a CD-R/RW/+R/+RW as a boot medium if it's been properly written -- there's no such things a a writeable CD/DVD at the firmware level.
You will need CD/DVD writing software for whatever Linux distribution you have.
If the disc is blank, it has no filesystem on it to mount -- this is completely normal. Or is there a filesystem on the disc? If there is, and the drive doesn't read it, it's relatively old if it came with that system -- and may be defective.
I now have a Matshita DVD+/-RW which works. Initially it failed to read a music CD and the advice I got was that the device might need a firmware update . However, thatt seems to me a quite unrealistic idea for a basic device like a CD/DVD read/writer. Would you agree?
ejn63
12 Elder
•
31844 Posts
•
156262 Points
0
0
Posted November 16th, 2024 11:53
Yes. More likely, the CD laser has been used far more than the DVD laser -- and has failed as a result.