
UNSOLVED
Dell SCv3020: Service Guide documentation for power problems
Hi all,
I am looking for the document “SCv3000 and SCv3020 Storage System Service Guide,” cited in Deployment Guide 680-136-001, as well as any “No Power / No POST” diagnostic procedures covering the chassis, backplane, auxiliary power supply, and power-on control.
I am experiencing the following issue:
The system has two power supplies with green indicators next to the power cords, but none of the fans are running, and none of the LEDs on the controllers or the front panel are lit. The power supplies and controllers have already been tested individually, with no change in the results.
I suspect:
- A failure in the chassis’s common power distribution or control circuit.
- Or a persistent shutdown state of the controllers or their power management (possibly related to a “normal shutdown” request issued from the iDRACs)
How my problem arose:
I wanted to replace the SAS cards with fiber-optic cards. Both fiber-optic cards were detected and visible from the iDracs.
For personal reasons, I wanted to switch back to the SAS cards. I shut down both modules via the iDracs using the “Normal Shutdown” function.
I reinserted the SAS cards into the two modules.
After inserting the two modules into the SCv3020, it won’t boot up anymore. (After checking the backplane and the connectors on both modules, none appear bent or have a suspicious color.)
The problem persists even when one or the other of the modules is removed, and even when one or the other of the two power supplies is removed.
I’d appreciate any suggestions you might have.
Thanks in advance, folks.
Responses (0)
Solutions (0)
