Minor Geek

updated

1 year ago

MG

Minor Geek

1 Rookie

•

2 Posts

•

2 Points

0

694

May 14th, 2025 19:02

Tower Plus EBT2250, crashes

Twice in the month since this computer arrived from Dell, it has suddenly gone to a totally black screen, then rebooted. When it has done this I have not touched the keyboard or mouse for several minutes prior, then suddenly the screen goes black. Anyone else seen this? Any suggestions?

(edited)

  • ejn63

    12 Elder

    •

    31849 Posts

    •

    156277 Points

    1

    0

    Posted May 14th, 2025 20:57

    What is the timeout set for (look under power management)?

    Is the system still running Windows updates?  Those do come with reboots.

    (edited)

  • Minor Geek

    1 Rookie

    •

    2 Posts

    •

    2 Points

    1

    0

    Posted May 14th, 2025 21:44

    Screen turn off after 10 min

    Sleep after 10 min

    Get latest Windows updates ASAP: OFF

    Notify me when a restart is required to finish updating : Was OFF, I turned it ON.

    Update history shows some update activity that MIGHT have been the cause of at least one of the reboots.

    MANY thanks for your suggestions. I'll keep an eye out.

  • ddddddustin

    1 Rookie

    •

    1 Message

    •

    2 Points

    1

    0

    Posted September 11th, 2025 16:04

    it has happened to me at least 4 times and i have no idea why.

  • ispalten

    7 Practitioner

    •

    2651 Posts

    •

    9774 Points

    1

    1

    Posted September 12th, 2025 16:26

    Most likely what others have said. More than likely Windows Update doing an update and you might have missed it was going to reboot or do NOT have it set to show you.

    This setting in Windows Setting SHOULD be on:

    That will put a dialog box on the top of the right side of the Taskbar alerting you that a reboot will take place in a short period of time.... that notification is off, it would proceed to do the reboot. In that Dialog box you can DELAY the reboot, and it shrinks to an icon on the Systray with a red dot on it if you choose to do it later... you can open that icon and boot from there, do it manually, or just shutdown, MS Update will do its part and power off, and the next time you power on, it will complete the update (and may reboot one or more times as well).

    To 'verify' the 'problem' was caused by MS Update, in the Windows Settings for Update main page is a bar to look at the Update History. Note the time of the reboots and see is it was installing something at that time to be sure it was.

  • me9798

    1 Rookie

    •

    12 Posts

    •

    2 Points

    1

    0

    Posted September 12th, 2025 23:06

    I have the same issue. I'm just sitting at my computer (EBT2250 I got in July), the screen goes black because it's rebooting. This is long after any windows updates, sleep settings, or anything else. I can be typing a document or surfing the web, and it just shuts down (and restarts). This issue is not solved...sorry.

    (edited)

  • ejn63

    12 Elder

    •

    31849 Posts

    •

    156277 Points

    1

    0

    Posted September 12th, 2025 23:13

    Go into the system properties, advanced tab and under startup and recovery, uncheck the automatic restart.  The next time the system encounters an error, it should write a crash file.  Use something like Who Crashed (Resplendence Software, the free version will do the job) to parse the crash file so you can see what's causing the issue.

    How to Disable Automatic Restart in Windows 11: A Step-by-Step Guide

    (edited)

  • me9798

    1 Rookie

    •

    12 Posts

    •

    2 Points

    1

    0

    Posted September 12th, 2025 23:32

    Thank you for that. I'll be working on this and will post results if/when it happens. Hopefully good ones, and soon.

  • ispalten

    7 Practitioner

    •

    2651 Posts

    •

    9774 Points

    0

    0

    Posted September 12th, 2025 23:47

    @me9798​ 

    There is a GOOD chance a DUMP file was created...

    How to find one if it is there:

    OPEN a COMMAND PROMPT.

    Make sure it is on C: at the root. If it shows C:\ you'll be OK, but it might also show "C:\Windows\System32>C:\Windows\System32>" as well. In that case, just enter "cd \" and you'll be back at the C: root. Now enter "dir *.dmp /s /p"

    If you do find any, and you probably will, look at the TIMESTAMPS for the files... one that matches closely the time that it happened is probably it.

    More than likely it will be a Device Driver, with the Video one a high probability.

    You might also want to run in a Adminstrator CMD prompt these commands:

    ======================

    these are the commands, you have to enter line by line.

    Open Start, type: CMD

    Right click CMD

    Click Run as administrator

    Type in at the prompt OR Copy and Paste these one at a time : (Hit enter after each)

    Dism /Online /Cleanup-Image /CheckHealth

    Dism /Online /Cleanup-Image /ScanHealth

    Dism /Online /Cleanup-Image /RestoreHealth

    Also run the System File Checker utility:

    Open Start, type: CMD

    Right click CMD

    Click Run as administrator

    At the Command Prompt, type: sfc /SCANNOW

    This will check for any integrity violations

    Restart your system

    ======================

    Since you probably have an RTX4060 card, have you applied any NEW driver for it? One Dell posted or one from Nvidia? Some recent drivers for that card have been causing some problems. 

  • me9798

    1 Rookie

    •

    12 Posts

    •

    2 Points

    1

    0

    Posted September 13th, 2025 00:14

    I have the 3050 card, but I did (stupidly) install Nvidia's version of the driver which I later uninstalled using Display Driver Uninstaller in safe mode, and then reinstalling Dell's proprietary Nvidia drivers with Windows Update paused. But a day later, I got the reboot. Next, I'll be looking into your suggestions. Thank you.

    (edited)

  • ispalten

    7 Practitioner

    •

    2651 Posts

    •

    9774 Points

    0

    0

    Posted September 13th, 2025 12:58

    @me9798​ 

    From my XPS8940 experience, and working with Dell Support, it was not 'stupid' to do that. 

    From what I learned Dell does NOT build a special driver. My RTX2060 is also made by MSI. MSI's site doesn't post card drivers. They tell you to use Nvidia's Site.

    Dell DOES test occasional Nvidia drivers and if 'OK', they post those. Only then, will they 'Support' the system, otherwise if you installed a non-posted video driver, they will instruct you to use the Dell posted one and test again.

    I had a 'booting' problem where my desktop blanked out right after appearing on boot for a few seconds.. Dell driver being used, was told to try the Nvidia latest, didn't help... 'playing around' after Dell replaced my video card and then the motherboard after that with no help, I had to wait for a higher level of support to contact me... I used DDU to remove all vestiges of the Dell video driver and installed the latest Nvidia again. Problem solved.

    Later, when a new Dell BIOS dropped in 2020, I and other Nvidia users experienced lock-ups/freezes of our PC... Dell couldn't 'repeat' the problem, and many of us tried different things... it took months, new BIOS, new Nvidia drivers, maybe for at least 6 months... and many people had different solutions. For me, it was the Nvidia Control Panel. Had to set the Power settings in the 3D Settings to Max. Power. FIXED... but some new driver installs will set that back to the DEFAULT setting. If I forget to check after a driver install, I will still have the lock-up happen it seems... quick check, power at DEFAULT, and set it back to Max Power, problem solved.

    You 'might' be interested in scanning this Nvidia driver forum web page, https://www.nvidia.com/en-us/geforce/forums/game-ready-drivers/13/574380/geforce-grd-58129-feedback-thread-released-91025/. and it is people reporting problems with the latest Nvidia Driver (good for all cards). It is version 581.29, and almost all card model's have had problems. Last suggested driver that was known to be good was V366.45. I had used that one for a long time... but now, I am on the latest one released on Sept. 10th and I've had no problems. The web page IS for that release, and I recall some RTX 30 series users have had problems.

    In that forum page, you will see things like this:

    ===============================

    Getting since the 50series Launch during ever Driver ver. 500.xx install a Blackscreen and then the Video_Memory_Mangement_Internal(0x10E) causing in constaly reboots till i reinstall 366.45 which get rid of the error. I used DDU since January when I tried to install one of the new Drivers since nine months. System is an Acer Predator helios 300 CPU: i7-10750h GPU: NVIDIA GeForce RTX 3070 Ram: 32gb sodimm Nvim m.2 ssd: 2x samsung 970 1 tb tested another Laptop MSI Sword 16 HX B14VFKG-003UK Gaming Laptop CPU: Intel Core i7-14700HX Processor GPU: NVIDIA GeForce RTX 4060 Ram: 16GB DDR5 Memory 1TB NVMe SSD both Systems also had Windows 11 freshly installed and both had the same Error since 9 Months with every Driver ver. 500.xx never had any Issues but this GPU release with the Drivers are really bad Nvidia should really check there Drivers is getting annoying not been able to update my GPU drivers.

    ===============================

    Although for a 3070, it generally could be a problem for any 30 series card... however, most of the problems since the V580 series of the driver are for 40 and 50 series cards.

    If the .DMP file (my experience with the RTX2060 was NO .DMP file was created) doesn't exist, I'd go to the Nvidia site and get the older driver and test, or at least an older driver version.

    Might want to check the Power setting in the Control Panel as well... Max. Power is OK for a desktop as there is no battery to drain and see if that helps (just a suggestion based on my experience).