UNSOLVED

JNS_Do1dona

updated

2 months ago

J

JNS_Do1dona

1 Rookie

•

2 Posts

•

7 Points

0

272

September 16th, 2026 17:59

Tower Plus EBT2250, adding/substituting hard drives

I currently have the original 1TB hard drive NVMe 2650 that came in the computer in drive C (boot) and a 4TB WD NVMe as drive D. It is working fine (although Dell support says it is not in the manual specs.

 

I need to replace the 1TB SSD with a larger capacity - preferably a 4TB. 

 

Can anyone tell me if substituting the original drive with a 4B NVMe will work in this computer?

(edited)

  • redxps630

    11 Legend

    •

    16434 Posts

    •

    83185 Points

    15

    1

    Posted September 16th, 2026 20:25

    User validated 4TB NVMe ssd in ebt2250

    https://www.userbenchmark.com/UserRun/72767006

     

  • JNS_Do1dona

    1 Rookie

    •

    2 Posts

    •

    7 Points

    16

    1

    Posted September 16th, 2026 21:07

    @redxps630​ 

     

    I ran the userbenchmark. It indicates a third SSD - Samsung 850 Evo 500GB. I was unaware of this and don't recognize it. It is not listed in the component scan results from the Dell site. Do I actually have 3 SSD slots? What is the Samsung one?

  • Tesla1856

    10 Wizard

    •

    18086 Posts

    •

    71947 Points

    7

    0

    Posted September 17th, 2026 00:08

    @JNS_Do1dona​ ,

     

    @redxps630​ 

     

    I ran the userbenchmark. It indicates a third SSD - Samsung 850 Evo 500GB. I was unaware of this and don't recognize it. It is not listed in the component scan results from the Dell site. Do I actually have 3 SSD slots? What is the Samsung one?

    I suggest you do all of the following:

    a. Run Disk Management and look

    b. Download and read PDF manual

    c. Open computer, look, and take some pics

     

    Yeah, a 4tb NVMe SSD should work as C-Drive, but it's gonna be pricey now-days. Since it's a boot-drive it can be rather daunting if you don't know what you are doing (especially if you are looking to migrate a bunch of stuff).  

     

    For optimal performance, be sure you get "the right speed tech" NVMe-SSD (4x4 or whatever your slot can handle).

     

    I do wonder why your existing 1tb NVMe SSD isn't big enough for Windows and your installed programs.

    (edited)

    Dell Rockstar

    Microsoft Windows and Apple iOS Developer (Retired)
    - Like many of you, I can appreciate a good game-engine.
    - I answer questions here, but I'm not a Dell employee.
    - Consider giving posts you like a "thumbs-up"
    - Posting models-numbers and software versions speeds trouble-shooting.
    - Click "Mark as Accepted Answer" on any post that answers your question best.

  • DashMark

    1 Rookie

    •

    10 Posts

    •

    39 Points

    13

    1

    Posted September 17th, 2026 02:53

    Adding or substituting hard drives in the EBT2250 can raise some important questions around compatibility, storage configuration, and system recognition. It would be useful to know which drive specifications are supported and whether any BIOS or storage-controller settings need to be changed after installing a replacement.

  • DELL-ChrisM2

    Community Manager

    •

    2007 Posts

    •

    10044 Points

    12

    0

    Posted September 17th, 2026 10:37

    It indicates a third SSD - Samsung 850 Evo 500GB

     

    The Tower Plus EBT2250 motherboard only has two M.2 PCIe SSD drive ports. So not sure why you see three drives?

     

    #5 M.2 PCIe SSD 1

    #10 M.2 PCIe SSD 0

     

     

     

    #IWork4Dell

  • redxps630

    11 Legend

    •

    16434 Posts

    •

    83185 Points

    11

    0

    Posted September 17th, 2026 11:26

    OP just like the user uploaded benchmark there are two NVMe ssd including a 4TB NVMe ssd, and a third 2.5” sata ssd Samsung 850 Evo 500GB.

  • ispalten

    7 Practitioner

    •

    2652 Posts

    •

    9776 Points

    8

    0

    Posted September 17th, 2026 15:46

    @DashMark​ 

     

    There is a 'difference here' as to what works or what Dell Supports.

     

    Basically, Dell only lists what it has tested. That is NOT the definitive answer though.

     

    More than likely the answer is WHAT does Windows support. Some of that might depend on the File System one wants to use.

     

    The only 'thing' I think that matters IS the OS. That and do you have the slots and plugs for the h/w you want to add.

     

    If you have a 'specific' device in mind, please ask, but you'll find in this forum (or all of Dell's forum) searching for the device size or specific device model, usually someone has tried it and it has worked. I don't recall seeing any post that a specific device doesn't work, but many posts on how to install one if the PC doesn't have a slot or cable for it?