Failure of downloading update package to managed servers
Hi
Had problem to push out firmware update to multi hosts through OME.
Below is the error report, it seems the download link given to the target host missing OME server’s IP address??? – apparently " http://:1278 " is not a full meaningful IP Address presented to hosts.
I can download the update file by using a FULL OME server's IP address like "http://x.x.x.x : 1278/xxxxx"
Results:
Downloading Packages.
Calling InstallFromUri method to Download packages to the iDRAC
Downloading Package: Network_Firmware_NF92Y_WN32_7.10.18.EXE onto the iDRAC
Package download has successfully started and the Job ID is JID_146034109453
So, do you have IPv6 enabled? Most of the folks who run into this and disable IPv6 see it resolved. So do review this and the referenced thread. If not IPv6, then we can look at a few other things.
Ok, so I don't think you have to restart OME, but if you did, there is a restart OME services button in the OME preference screen.
Anyway, at a minimum you can right click on the server and re-run disc/inventory, but you might even be able to get away with out doing that. I think when you run the patch task it makes a GetHostIP call to windows, so I expect you can just give it another go.
I am experiencing the exact same issue. Did you ever get this resolved? I currently have alot of servers in OME and no firmware updates can be applied.
DELL-Pupul M
2 Intern
•
1004 Posts
5532
0
Posted October 30th, 2014 22:00
You can also check if this post helps you:
http://en.community.dell.com/techcenter/systems-management/f/4494/p/19601242/20691098#20691098