UNSOLVED

JSchroer

updated

14 years ago

J

JSchroer

10 Posts

0

13525

January 7th, 2013 13:00

DRAC inventory issue

How should I be discovering and inventorying my DRACs? When I've set them up to us SNMP I get a warning under the System update - Issues and Resolutions for updates stating these DRACs have been discovered using SNMP use WS-Man to discover them. So I changed the discovery to use WS-Man but when I do that they fall under Unknown devices with no information in them

I've ran the troubleshooter and it says it can connect to them using WS-man with no issues.

  • JSchroer

    10 Posts

    558

    0

    Posted January 7th, 2013 13:00

    Found this in another thread. Looks like this is what I was looking for.

    In the OME discovery wizard, under WSMAN configuration page, make sure to enable "Secure Mode". If you dont have the certificate (file), select "Skip common name check" and "Trusted Site" options as well. Re-run discovery/inventory.

  • DELL-Rob C

    4 Apprentice

    •

    2843 Posts

    558

    0

    Posted January 7th, 2013 14:00

    Yep....I was just going to suggest that.  Thanks and good luck!

    Rob

  • frentica

    1 Rookie

    •

    49 Posts

    558

    0

    Posted March 21st, 2013 08:00

    What username/password should you be using for the discovery under the WS-man settings?

  • JSchroer

    10 Posts

    558

    0

    Posted March 21st, 2013 09:00

    What ever username that has access into the DRAC.