UNSOLVED

bradje1

updated

14 years ago

B

bradje1

2 Intern

•

743 Posts

0

58709

May 22nd, 2012 19:00

Deploying OMSA upgrade to Windows from 6.5 to 7

I cannot figure out the steps for this to complete the update.

I created a Task by cloning the Sample. Then I entered what I thought were the correct answers for each field and ran it, but it failed to update, even though the task had a Green status of 100% completed, but Successful/Total Targets = 1/1. Go figure???

((When trying to Edit the task a message comes back saying it cannot be edited since it has been run!! Grrrrr!))

The steps used are:

1. Type the installer path to SysMgmt.msi

2. Install Ags are: REINSTALL=ALL REINSTALLMODE=vomus

3. Untick Allow Reboot

4. Select the server requiring the install

5. Select Run Now

6. Enter the domain Credentials and Finish

As said above, the task says it's successful, but when checking on the remote server it's still at the old version of 6.5.

What's the trick to get this working?

Thx,

John Bradshaw

  • DELL-Abhijit P

    Community Manager

    •

    711 Posts

    532

    0

    Posted May 23rd, 2012 08:00

    Hi John,

    Thanks for your post. Not sure if you have looked at the white paper below. It walks you through the process of installing/upgrading OMSA.

    http:/en.community.dell.com/techcenter/extras/m/white_papers/20069180.aspx

    ">http://en.community.dell.com/techcenter/extras/m/white_papers/20069180.aspx

    You are doing most of the things correctly. Sometimes the target node needs a restart based on the upgrade versions. You can try restarting the target server once.

    Here are some recommended troubleshooting steps:

    1. Make sure the OMSA package selected from the task is getting copied at C:\Program Files (x86)\Dell\SysMgt\Essentials\SystemUpdate\Packages
    2. On OME box, open windows task manager. Check if any instance of omremote.exe is running, if yes kill all the instances.
    3. Restart Task Manager Service
    4. On the MN, open windows task manager. Check if any instance of omexec.exe is running if yes kill all the instances.
    5. On the MN, open windows task manager. Check if any instance of RunBada.exe is running if yes kill all the instances.
    6. Delete Windows/Temp directory
    7. Delete %Temp% directory
    8.  Try OMSA update again.

    Regards

    Abhijit

  • Arbeider

    4 Posts

    532

    0

    Posted May 31st, 2012 03:00

    I've had the same issues here. I've been in contact with Cathal and we found the following:

    To succesfully upgrade OMSA 6.5 to 7 on Windows machine follow these steps:

    1. Go to remote tasks, right click Deploy Server Administrator and choose create Deployment task

    2. Give it a task name (can be anything)

    3. Choose windows

    4. Locate the sysmgmt.msi (make sure the whole omsa setup is locally on the ome server) for instance: D:\Beheer\OpenManage\7.0\windows\SystemsManagement

    5. Do not give any parameters (This is the trick) or try to use ADDLOCAL=ALL

    6. Also make sure that al NTFS rights are properly inherited. We had the problem that on the following directories this wasn't the case:

    C:\Program Files (x86)\Dell\SysMgt\Essentials\SystemUpdate\Cabinets

    C:\Program Files (x86)\Dell\SysMgt\Essentials\SystemUpdate\Packages

    7. Create the schedule or say run now.

    8. Use the correct credentials and clik Finsh

    This did the trick at our place. Hope it will help you too.

  • bradje1

    2 Intern

    •

    743 Posts

    532

    0

    Posted May 31st, 2012 21:00

    Thx mate...Shall let u know soon!

    JB

  • KBeau

    2 Intern

    •

    387 Posts

    532

    0

    Posted June 1st, 2012 09:00

    Just wanted to let you know that I just tried this method in my own environment and it worked beautifully!  Thanks!

    KBeau

  • bradje1

    2 Intern

    •

    743 Posts

    532

    0

    Posted August 2nd, 2012 20:00

    Works fine!

    Thx

    JB