UNSOLVED

jammac

updated

6 years ago

J

jammac

1 Rookie

•

124 Posts

1

4493

January 12th, 2019 07:00

OME 3.1: configuration inventory and compliance baselines

Hey,

I am having a hard time figuring out how to create and actually run a compliance baseline.

I've 1) created a deployment baseline from reference device 2) a compliance template based on the deployment baseline and 3) a compliance baseline based on that.

Configuration inventory and Configuration compliance tabs on a specific server are empty.

Apparently OME is lacking the servers' configuration inventory. Indeed, looking at "Monitoring - Jobs" at 01:00 AM a Configuration inventory job failed with the error: SYS045 --> Unable to copy the Server Configuration Profile to the network share.

What network share is it talking about??? Of course I've looked at OME User's Guide but to no avail.

Note: We do have iDrac Enterprise and OME Server configuration licenses installed alright.

Thx

  • 4057

    0

    Posted January 15th, 2019 13:00

    I ran into the same issue as well.

  • DELL-Pupul M

    2 Intern

    •

    1004 Posts

    4027

    0

    Posted January 16th, 2019 08:00

    Hi,

    The share in question here is the internal share carried by OpenManage Enterprise to copy the information from iDRAC. You will need to make sure that all the necessary ports required to run Configuration Inventory are enabled between iDRAC and appliance. Please look at the details in this link:

    https://www.dell.com/support/manuals/us/en/04/dell-openmanage-enterprise-tech-release/ome_techrelease_ug/supported-protocols-and-ports-on-management-stations?guid=guid-3226ec7a-8854-4f3d-be3a-3f3b6fcdbb08&lang=en-us

  • jammac

    1 Rookie

    •

    124 Posts

    3968

    0

    Posted January 18th, 2019 17:00

    Well it's in the same subnet so it wasn't a network issue.

    I don't know what fixed it, maybe the problem was not having configured an online repository yet at all. Also, maybe inventory of servers wasn't entirely complete. One should take care to "Run inventory" with config inventory if in doubt.

    That part of the setup is really not straightforward but now it's working.

    In general, OME (3.x) is quite a nice tool, it's a shame that it took until the year 2019 for something similar to exist.

  • oxiclean

    1 Rookie

    •

    5 Posts

    2746

    0

    Posted August 23rd, 2019 10:00

    I ran into this problem recently as well. Our OME instance was on another subnet from the rest of our iDRACs. We verified there was no network traffic being blocked between the two networks. After much troubleshooting, I built up a new instance of OME and it started working. 

    It looks like there was maybe some corruption going on with our original OME instance. 

  • Grant_Curell

    1 Rookie

    •

    23 Posts

    1396

    0

    Posted November 4th, 2020 06:00

    To force the configuration inventory to update you have to go through the "Run Inventory" process on the "All Devices" page under "QUICK LINKS".

    screenshot.png

    If you hit "Run Inventory" on the device itself that *will not* update the configuration inventory tab. I just pull requested a Python script which will do this programmatically as well available here: https://github.com/dell/OpenManage-Enterprise/pull/70/files#diff-c060dba8ede2badc1b4b20355556bc4c5dff3a42ca69874e76aed30befa357a6

    After it's accepted it will be here:

    https://github.com/dell/OpenManage-Enterprise/tree/master/Core/Python

     

  • YaskoT

    1 Rookie

    •

    31 Posts

    1259

    0

    Posted December 15th, 2020 08:00

    Hi,

    Looks like the issue appeared in our network too, has it been fixed yet by DELL ?

    PS> Looked at the Python script, but where shall we place that? Please provide some more info.

     

    Thanks