I am not aware of a Best practice guide for this. Bear in mind that the switchstatuspolicy is just informational, it will mark the switch MARGINAL or DOWN depending of the policy set, but the switch will keep working, no matter its status (unless it is really faulted...).
If you feel that the default values are too loose, then you may have a stricter policy implemented on your directors using the command, 'switchstatuspolicyset'. There is no best practice for the policy you can set, it totaly depends upon your requirement that you set these policies. However coupled with the event logs which record these status change events and email alerts you may get notified of these changes and thus you may take corrective measures to fix such a situation. Rightly said Amita, that it depends upon how fault tolerant you want your environment to be.
felipon1
96 Posts
429
0
Posted October 23rd, 2012 04:00
Hi,
I am not aware of a Best practice guide for this. Bear in mind that the switchstatuspolicy is just informational, it will mark the switch MARGINAL or DOWN depending of the policy set, but the switch will keep working, no matter its status (unless it is really faulted...).