UNSOLVED

kerberos451

updated

11 years ago

K

kerberos451

13 Posts

1

38292

August 21st, 2015 09:00

Best Practices Windows 2008R2 Host On Compellent SC8000

Because Windows doesn't deal with interruptions to storage very well Ive been trying to gather best practice/proper configuration of a Windows 2008R2 host attached to an SC8000 via FC.  This far Ive found the following:

Install Windows Patches:

Windows MPIO settings:

  • Set default MPIO - mpclaim.exe -L -M 2 -d "COMPELNTCompellent Vol"
  • Registry settings
  • PDORemovePeriod   120
  • PathRecoveryInterval  25
  • useCustomPathRecoveryInterval 1

Emulex HBA settings:

  • NodeTimeOut    60
  • QueueDepth    254
  • Topology    1  (I couldn't find this setting)

Anybody else found anything useful to add or consider?

  • 1597

    0

    Posted August 22nd, 2015 19:00

    Hello.  

    The DELL Tech Center has many whitepapers for Compellent.  (scroll down to Windows Server)

    en.community.dell.com/.../5018.compellent-technical-content

  • kerberos451

    13 Posts

    1597

    1

    Posted August 24th, 2015 09:00

    Thanks, Ive looked over many of those documents (where I got a lot of the info above), some I have not.  I was just looking for real world responses + documentation.

    Thanks

  • 1597

    0

    Posted August 26th, 2015 18:00

    I'm curious if anyone has any similar real-world responses as well, except for QLOGIC HBAs

  • kerberos451

    13 Posts

    1597

    0

    Posted September 11th, 2015 14:00

    I can say that going with my original config has worked without issue thus far, but as you noticed, I'm working with Emulex.  Definitely do the Windows patches & MPIO settings.