imkg

updated

20 years ago

I

imkg

6 Posts

0

1058

May 10th, 2007 18:00

Too Time Consuming to disable Call Home

Navisphere is slow to display hosts on the monitor tab. This is a multiple array domain with hundreds of hosts. Also, Navisphere displays the IP addresses of the arrays last so you always wait a long time before they appear (~20 minutes).

I would like to know if there is a navicli or naviseccli command which I could use to disable call home. Waiting for the SP to appear in the monitor tab so I can right click it to disable call home is too time consuming.
  • 528

    0

    Posted May 15th, 2007 06:00

    response from an SP but I'm trying to disable a
    response from a call home PC.

    you could stop or pause the navi agent service on the pc
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    528

    1

    Posted May 10th, 2007 18:00

    take a look at command "emcconfiguration" ...it works with naviseccli and navicli

    Example: navicli -h ss1_spa emconfiguration -reloadconfig -disableresponse
    time -enableresponse
  • imkg

    6 Posts

    528

    0

    Posted May 11th, 2007 13:00

    Well, the emcconfiguration command only works for Release 24. I am using Release 19. Also, the emcconfiguration command is used to disable a response from an SP but I'm trying to disable a response from a call home PC.

    On the other hand, the emcconfiguration command is really slick. If I had to disable email home on a machine running Release 24, I could use this command and email home would automatically reenable itself after the allotted time (can't forget to reenable).