if you know for certain what LUN # you want to remove, go into Navisphere, right click on the storage group, select properties, go to LUNs ..click on the LUN you want to remove and hit the arrow pointing left. I would wait an hour before unbinding the LUN just to make sure you did remove the correct one
one way to identify Clariion LUN # is to run powermt display dev=all on the host ..before you remove the LUN, in the output it will display LUN # / name.
"dynamox" had it all - it's that easy . However, one thing I like to add - you may have to consider unmounting or deleting the device created on that LUN - on the respective Host that was accessing the LUN - depending on what type of OS you are running. Thanks, Sandip
dynamox
11 Legend
•
20419 Posts
•
87439 Points
373
0
Posted February 3rd, 2009 05:00
one way to identify Clariion LUN # is to run powermt display dev=all on the host ..before you remove the LUN, in the output it will display LUN # / name.