UNSOLVED

rmeister1

updated

17 years ago

R

rmeister1

16 Posts

0

966

April 6th, 2010 09:00

PPME Host Copy Speeds

Hi All:  New to Host Copy and am currently planning a migration at a customer site for 2 TB of data.  Have been testing PPME Host Copy at the office and the speed is terrible.  I have been playing around with the throttle and suspend values and am not seeing any good results.  So far it has taken 45 minutes to copy 500 mb of data.  We don't have the fastest servers and and an older clariion but that is really bad.  Any hints on what I might be doing wrong?  Or is it just really slow?   Thanks in advance and have a great day.

Rick

  • AranH1

    2163 Posts

    423

    0

    Posted April 6th, 2010 10:00

    Hi Rick,

    I don't have the atual answers for you, but based on my reading of the admin guide for PPME host copy I would expect the host copy to be significantly less than an array based replication. Since the host copy uses the host i/o to mirror the source volume to the target volume it will be a low priority thread as the application using the source volume will require priority access for it's LUN i/o. If the server is older, isn't a multi-core cpu, and doesn't have a lot of memory then this would contribute to the slowness as well.

    Are you able to stop host i/o to the source lun and run a test using the highest transfer settings?

    Aran

  • rmeister1

    16 Posts

    423

    0

    Posted April 6th, 2010 13:00

    hi Aran:  I can't find a way to actually stop the app once it is running.  but I am having an issue with the target drive.  As soon as you start the migration the target goes offline.  Using windows 2003 so not sure why that would be.  There are events in windows event viewer that indicate that the target drive no longer exsists.

  • kelleg

    6 Operator

    •

    4537 Posts

    423

    0

    Posted April 6th, 2010 14:00

    What are your source and destination LUNs - raid type, disk speed, number of disks in LUN?

    Are LUNs in same raid group?

    What type of HBA, drivers up-to-date, FC speed? Number of paths?

    Using PowePath? What version?

    glen

  • AranH1

    2163 Posts

    423

    0

    Posted April 6th, 2010 14:00

    Rick,

    I was referring to the application running on the server that is using the LUN, not PPME. I was just wondering as a test if the migration was quicker if the app (whether it is file serving, sql, etc...) were not accessing the LUN. Obivously that defeats the purpose of PPME, being that you want to migrate a LUN with the app online, I was just thinking of it for testing purposes.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    423

    0

    Posted April 6th, 2010 18:00


    you are not supposed to bring the target drive online where it's visible in Windows Explorer, target drive does not need to be formatted either.  A step-by-step process is described in this paper.

    EMC PowerPath Migration Enabler Host Copy

    I can't find a way to actually stop the app once it is running.  but I am having an issue with the target drive.  As soon as you start the migration the target goes offline.  Using windows 2003 so not sure why that would be.  There are events in windows event viewer that indicate that the target drive no longer exsists.

  • MitchW1

    5 Posts

    423

    0

    Posted April 8th, 2010 11:00

    Rick,

    Referring back to my initial testing of PPME on a older server I copied a 100GB LUN (R5 4+1 Clariion CX3) in 1h34m on throttle 2, 56m on throttle1 and 35m on throttle 0.  These times are for an idle server and idle disks. 

    Mitch