happyadm

updated

17 years ago

H

happyadm

77 Posts

0

1404

July 1st, 2009 09:00

navisphere agent question

Hi,

I am testing the disk group migration of one of my test servers from my old cx-700 to my new cx4-120. Right now, the server is connected to a cx-700 using the navisphere 6.19 agent. My new cx4-120 is running FLARE code 6.28, and I have the agent 6.28. If I upgrade to the 6.28 agent on the solaris server, will the cx-700 still see it? I zoned it on the switch,and the new SAN does see the HBA(s), however, it is telling me the server is unmanagable and I would assume that is because of the agent version. Is there a upward/downward compatible agent version that I can upgrade my clients to instead?

Thanks!

Happyadm
  • kelleg

    6 Operator

    •

    4537 Posts

    870

    0

    Posted July 1st, 2009 10:00

    If you check the Release note for the Navisphere Server Utilities, on page 9 you will find the compatibility list - Agent 28 will support release 19. You can install Agent 28 on the server.

    glen
  • AranH1

    2163 Posts

    870

    1

    Posted July 1st, 2009 09:00

    Generally the Navisphere agents are backwards compatible within one or two revisions. Using naviagent 6.28 to talk to an array running FLARE 19 may be outside that supported range. I would try installing naviagent 6.26. I know that 6.26 will work with FLARE 28 and am pretty sure it will work with FLARE 19.
  • happyadm

    77 Posts

    870

    0

    Posted July 1st, 2009 10:00

    Thank you Aran! I will download the agent and try it.
  • happyadm

    77 Posts

    870

    0

    Posted July 1st, 2009 10:00

    Thank you Glen! I will keep you guys posted on my result.
  • happyadm

    77 Posts

    870

    0

    Posted July 1st, 2009 11:00

    Thanks again, Glen and Aran. Navi agent 28 worked and I can see the server from both the cx4-120, and cx-700. I marked Aran's response helpful, and Glen's correct.

    I appreciate this forum so much!

    Happyadmin
  • happyadm

    77 Posts

    871

    0

    Posted July 1st, 2009 12:00

    Hi Aran,

    Since I am on a Solaris server, I did a pkgrm (package remove) of the Navisphere 19 agent and then reinstalled the package for the Navi 28 agent for Solaris. When I restarted the agent I saw that the server was now managable on both the cx-700 and cx4-120. I downloaded the agent from the software link.

    Thanks again!

    Happyadm
  • AranH1

    2163 Posts

    871

    0

    Posted July 1st, 2009 12:00

    Happy,
    What did you do to get the agent recognized on the array?

    I agree, this is a good forum, lot's of helpful folks on here :D
  • RRR

    6 Operator

    •

    5739 Posts

    871

    0

    Posted July 2nd, 2009 08:00

    I agree: this is a wonderful forum
    We just love all those happy admins ;)