UNSOLVED

Ram_Emc

updated

14 years ago

R

Ram_Emc

17 Posts

0

693

September 24th, 2012 01:00

MV/CE cluster failover

Hi all,

We have setup of MV/CE cluster on Microsoft windows 2008 across sites using CX4 sync replication..

In Primary node, we have 5 CE groups configured. Each CE group is a individual lun in CX4..

During the BCP exercise, we initially cut the Network connection across sites.Since the heartbeat lost between the cluster nodes the expected behaviour is

the cluster failover automatically .. Once the failover happens, we planned to cut the FC across sites..

but after NW cut, the IP and hostname resources are failedover to secondary server ..But the disk resources are not coming up.. In storage also , we see the roles have not swapped..

So we immediately did the storage level promote and then continued the FC cut ..

But ideally, MV/CE should initiate the disk failover to secondary also automatically..

Recently in the same server, we added one CE group but since it is of 3 luns we configured as a consistency group at storage side..

After this, recently we did the BCP exercise .. During this, the cg group is failedover automatically after Network cut .. But all individual luns needed to be promoted at storage side..

Any idea about this, that the CG group is mandatory for CE group to failover ?

  • 204

    0

    Posted September 24th, 2012 03:00

    Per the plug in guide.  Single LUNs do not require a consistency group and when using the CE configuration wizard none is created.

    I would also review this guide as it details each failure scenario and the expected failover process.  Those sections should be your guide on what to expect during a failover of an indivudal cluster resource.

    Tom

    https://support.emc.com/docu31012_MirrorView-Cluster-Enabler-Plug-in-Version-Product-Guide-4.1.pdf?language=en_US

    Page 103

    For MirrorView/CE, when a Cluster Shared Volume (CSV) is

    converted using CE Configuration wizard, a corresponding

    consistency group is not created on the CLARiiON array, instead the

    mirror remains an individual mirror. For CLARiiON arrays, the

    creation of a mirror group does not require the creation of a

    corresponding consistency group if there exists only one mirror in the

    mirror group.