UNSOLVED

jgrinwis

updated

16 years ago

J

jgrinwis

1 Rookie

•

99 Posts

0

1948

October 28th, 2010 05:00

MDS scsi-target discovery

We've reinstalled some new Ciscso MDS switches in our fabric last week.

In our CX4's we had suddenly some initiators logging in which can't be found in the fcns database.

After some research it turned out that the MDS can do a scsi-target discovery using a combination of the switch vsan wwn and OS pwwn.

switch# show scsi-target pwwn

------------------------------

OS     PWWN

------------------------------

WIN    24:91:00:05:30:00:2a:1e

AIX    24:92:00:05:30:00:2a:1e

SOL    24:93:00:05:30:00:2a:1e

LIN    24:94:00:05:30:00:2a:1e

HP     24:95:00:05:30:00:2a:1e

We've disbabled scsi-target discovery but we're still seeing the VSAN WWN:WIN PWWN logged in into our CX4.
We're not going to use this feature, is there any other way to keep the switch from logging into the CX4.

John
  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    824

    0

    Posted October 28th, 2010 14:00

    i wonder if iSCSI service running on the switch logs-in as initiator to the array,  can you disable iSCSI and see if it logs out ? ( no iscsi enable)

  • ramkm

    3 Posts

    824

    0

    Posted October 29th, 2010 01:00

    restart the management server or SP A , SP B and check. Hope this could solve the issue.

  • jgrinwis

    1 Rookie

    •

    99 Posts

    829

    0

    Posted October 29th, 2010 04:00

    Host are not registered, only logged in via the FC ports.

    Not sure if disabling the iscsi part would solve the MDS from logging in via FC.

  • ramkm

    3 Posts

    829

    0

    Posted October 29th, 2010 04:00

    did try by deregister those initiators

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    824

    0

    Posted October 29th, 2010 04:00

    that will not do anything, they will log back in.

  • ramkm

    3 Posts

    829

    0

    Posted October 29th, 2010 05:00

    Try rebooting of SAN switch. this wil referesh the FC login

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    829

    0

    Posted October 29th, 2010 05:00

    reboot ? really ?  do you realize what you are suggesting ? Reboot the switch fabric.

  • hersh1

    197 Posts

    829

    0

    Posted October 29th, 2010 05:00

    Take a look at this thread: https://community.emc.com/thread/94957?start=0&tstart=0

    We've had this show up in our environment a couple different times and the way I've solved it is by registering the WWNs then switching to engineering mode and deregistering them. I don't think we have had them come back for a couple years now.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    397

    0

    Posted October 29th, 2010 05:00

    i have this issue with Symmetrix, would rather solve it on the switch side. I will try disabling iscsi service on one of the switches.

  • jgrinwis

    1 Rookie

    •

    99 Posts

    829

    0

    Posted October 29th, 2010 05:00

    there should be another way to solve this, we're not going to reload our production MDS to just get rid off a initiator login.