UNSOLVED

philt3

updated

16 years ago

P

philt3

1 Rookie

•

4 Posts

0

798

March 31st, 2010 12:00

Flare seed drive query

If a DAE2-OS is connected to the CX700 DPE and has one of the seed drives (disk0) only, is that enough for the Flare to boot? Also if the other drives (1-4) are empty how can the flare on the seed drive (0) be used to rebuild the other drives ?

Thanks

  • Kumar_A

    2 Intern

    •

    727 Posts

    282

    1

    Posted March 31st, 2010 17:00

    FLARE will not be able to boot from just Disk 0 on both Storage Processors. The first five drives in the first enclosure are called system drives and are used to store important boot images and configuration information. You will not be able to rebuild all the other vault drives with just Disk 0 in place.

    For more information, refer to the following document on Powerlink (page 123).

    *EMC CLARiiON Storage System Fundamentals for Performance and Availability*

    http://powerlink.emc.com/km/live1/en_US/Offering_Technical/White_Paper/H1049_emc_clariion_fibre_channel_storage_fundamentals_ldv.pdf

  • philt3

    1 Rookie

    •

    4 Posts

    282

    0

    Posted April 26th, 2010 20:00

    Do you have more details on how this is done - like a step by step procedure? I assume you need the

    utilitiy partition present on the seed drive and then the .mif files for the flare as well.

  • kelleg

    6 Operator

    •

    4537 Posts

    282

    1

    Posted April 27th, 2010 08:00

    There is a step-by-step procedure but it is limited to EMC service and Partners.

    glen

  • philt3

    1 Rookie

    •

    4 Posts

    282

    0

    Posted August 2nd, 2010 06:00

    Good answer