timgone1

updated

15 years ago

T

timgone1

10 Posts

0

3935

May 14th, 2012 09:00

FAST Cache missing in Unisphere

Has anyone else experienced an issue with their FAST Cache disappearing from Unisphere? It intermittently disappears from both of our CX4-480 arrays after upgrading to the latest .524 Flare. I'm noticing at the same times that it is missing, our 3rd party statistics collector shows 'no statisticts' for our FAST Pools.

2 Attachments

  • GearoidG

    251 Posts

    1095

    1

    Posted May 21st, 2012 09:00

    There is a support only primus which documents this issue emc289297

    There is a workaround which support can assist you carry out to resolve this issue "temporarily"

    This issue is going to be resolved in a later release of Flare Code on both VNX and CLARiiON

    This does not affect the usage of fast cache and is primarily a display issue

    Gearoid

  • AnkitMehta

    4 Apprentice

    •

    1365 Posts

    920

    0

    Posted May 14th, 2012 10:00

    We can try re-committing FLARE as well as the FASTCache (if needed) but down time is recommended for this activity and it is also done by EMC Personnel.

    I would recommend to Open an SR with EMC Technical Support specifying the issue.

  • AnkitMehta

    4 Apprentice

    •

    1365 Posts

    920

    0

    Posted May 14th, 2012 10:00

    The array was upgraded from FLARE 28 or 29 recently?

  • Madhug1

    2 Intern

    •

    127 Posts

    920

    0

    Posted May 14th, 2012 10:00

    Hi,

    If there was no upgrade or changes performed on the Array,

    Try restarting the management server of SPA and SPB, one after the other.

    Logout of Unisphere and Login, Check the status.

    Thanks

    Madhu

  • AnkitMehta

    4 Apprentice

    •

    1365 Posts

    920

    0

    Posted May 14th, 2012 10:00

    Can you please, upload the screenshot of SP Properties and if possible  naviseccli ndu -list output?!

  • timgone1

    10 Posts

    920

    0

    Posted May 14th, 2012 10:00

    I restarted the management server for both SPA and SPB last week. It immedietely resolved the issue, but the issue then returned about a day later.

  • timgone1

    10 Posts

    920

    0

    Posted May 14th, 2012 10:00

    Name of the software package:        -AccessLogix
    Revision of the software package:    -
    Commit Required:                     NO
    Revert Possible:                     NO
    Active State:                        YES
    Is installation completed:           YES
    Is this System Software:             NO

    Name of the software package:        -FAST
    Revision of the software package:    -
    Commit Required:                     NO
    Revert Possible:                     NO
    Active State:                        YES
    Is installation completed:           YES
    Is this System Software:             NO

    Name of the software package:        -FASTCache
    Revision of the software package:    -
    Commit Required:                     NO
    Revert Possible:                     NO
    Active State:                        YES
    Is installation completed:           YES
    Is this System Software:             NO

    Name of the software package:        -RecoverPointSplitter
    Revision of the software package:    -
    Commit Required:                     NO
    Revert Possible:                     NO
    Active State:                        YES
    Is installation completed:           YES
    Is this System Software:             NO

    Name of the software package:        -ThinProvisioning
    Revision of the software package:    -
    Commit Required:                     NO
    Revert Possible:                     NO
    Active State:                        NO
    Is installation completed:           YES
    Is this System Software:             NO

    Name of the software package:        -ThinProvisioning
    Revision of the software package:    -
    Commit Required:                     NO
    Revert Possible:                     YES
    Active State:                        YES
    Is installation completed:           YES
    Is this System Software:             NO

    Name of the software package:        -Unisphere
    Revision of the software package:    -
    Commit Required:                     NO
    Revert Possible:                     NO
    Active State:                        YES
    Is installation completed:           YES
    Is this System Software:             NO

    Name of the software package:        -UnisphereAnalyzer
    Revision of the software package:    -
    Commit Required:                     NO
    Revert Possible:                     NO
    Active State:                        NO
    Is installation completed:           YES
    Is this System Software:             NO

    Name of the software package:        -UnisphereAnalyzer
    Revision of the software package:    -
    Commit Required:                     NO
    Revert Possible:                     YES
    Active State:                        YES
    Is installation completed:           YES
    Is this System Software:             NO

    Name of the software package:        -UnisphereQoSManager
    Revision of the software package:    -
    Commit Required:                     NO
    Revert Possible:                     NO
    Active State:                        YES
    Is installation completed:           YES
    Is this System Software:             NO

    Name of the software package:        FLARE-Operating-Environment
    Revision of the software package:    04.30.000.5.524
    Commit Required:                     NO
    Revert Possible:                     NO
    Active State:                        YES
    Is installation completed:           YES
    Is this System Software:             NO

    1 Attachment

  • timgone1

    10 Posts

    920

    0

    Posted May 14th, 2012 10:00

    No. We were running 04.30.000.5.517 and upgraded to 04.30.000.5.524 on both of our arrays. Since then this issue has been occurring on both.

  • AnkitMehta

    4 Apprentice

    •

    1365 Posts

    920

    0

    Posted May 14th, 2012 11:00

    Indeed. What is the current status of FAST Cache? Is it showing correctly or incorrectly?

    ndu -list mentions it is Enabled so my guess would be it should so correctly.

    If not, then the steps I mentioned might need to be performed.

    If you are getting this issue intermittently, if Possible when it shows incorrectly is it possible you can check the same on different workstation? Java does act weird at times!

  • timgone1

    10 Posts

    920

    0

    Posted May 14th, 2012 11:00

    Thanks, I've reopened my SR. When Support called me back to take a look, FAST Cache was showing correctly again. Makes it hard to troubleshoot, but I'll keep trying. It's interesting that the same issue is occuring on both of our CX4-480 arrays.