Mikecom32

updated

16 years ago

M

Mikecom32

7 Posts

0

3014

September 15th, 2010 13:00

AX150SCi Write Cache Disabled

I have an AX150SCi that won't enable the write cache.  I've upgraded to the latest FLARE (02.20.150.5.027) and rebooted the unit a few times.  I've also tried reseating the cache module.

All components show as okay: http://imgur.com/Aeper.jpg

There is only one disk pool, one virtual disk, and one server.  Everything is connected and working (although I'm assuming it's much slower than it should be).

Any ideas?

Thanks guys!

  • kenn2347

    4 Apprentice

    •

    542 Posts

    1061

    0

    Posted September 16th, 2010 11:00

    maybe it is just showing that the memory part of the card is ok but the battery part doesnt get reported and can be bad.  were you able to get the support files uploaded?

  • kenn2347

    4 Apprentice

    •

    542 Posts

    1057

    0

    Posted September 15th, 2010 14:00

    I see that you only have one powersupply.  i thought it needed 2 to enable write cache?  I could be wrong.  been a very long time since i touched a ax150.

    And is it attached to the UPS that it came with?

  • weiw1

    14 Posts

    1057

    0

    Posted September 15th, 2010 23:00

    If your box is in warranty or EMC maintenance contract, you can call EMC support center for help. Do you have the SPCollect log of this box? If you have, I'd like to take a look on what's wrong for it.

    Thanks.

    WW

  • Mikecom32

    7 Posts

    1057

    0

    Posted September 16th, 2010 06:00

    From the manual:

    One (AX150SC or AX150SCi) or two (AX150 or AX150i) storage processors, each with:

    • One CPU fan
    • One serial port (RJ45 connector) for service
    • One 10/100 Ethernet LAN port (RJ45 connector) for management
    • For the AX150 or AX150i only, one serial port (RJ45 connector) for uninterruptible power supply (UPS)
    • One power supply per processor. A second power supply is optional for AX150SC or AX150SCi storage systems
    • One front-end (FE) card per processor, each with:
      • AX150 or AX150SC — two 2-Gbps Fibre Channel host ports (small form factor - SFF - connectors)
      • AX150i or AX150SCi— two 10/100 gigabit Ethernet ports (RJ45 connector)
      • A battery-backed cache card (AX150SC or AX150SCi only)
      • One 512-megabyte memory card per processor
      • Four (AX150SC or AX150SCi) or five (AX150 or AX150i) system fans

    This is an AX150SCi, so no UPS or second power supply.

  • kenn2347

    4 Apprentice

    •

    542 Posts

    1061

    0

    Posted September 16th, 2010 08:00

    So do you have the UPS that comes with that systems attached?  Everything i have read states that write cache will be disabled if you dont have it connected.  The AX cant be connected to normal rack UPS for write cache to function.

  • Mikecom32

    7 Posts

    1057

    0

    Posted September 16th, 2010 08:00

    I don't believe it is, but I took over for a previous admin when we moved our headquarters.  I had a load of hardware dumped in my lap with no documentation.  Is there an easy way to check warranty/maintenance status?

    This SAN only has Navisphere Express, so I don't have access to a CLI (correct me if I'm wrong, I'm relatively new to all of this), so I don't know how to run an SPCollect.

    On the off chance it happens to be the "Generate diagnositc files for your storage system to be sent to product support" link, I've uploaded the files here:

    EDIT: Link deleted

  • Mikecom32

    7 Posts

    1061

    0

    Posted September 16th, 2010 10:00

    That's what I was thinking, but the SAN shows the card as being okay (I attached a pic in my first post).

    I'm baffled.

  • kenn2347

    4 Apprentice

    •

    542 Posts

    1061

    0

    Posted September 16th, 2010 10:00

    Sorry,  i read over it really fast and didnt notice that.  I have never worked with the SC versions and didnt know they do not come with a UPS.

    Since it has a battery back cache card, i would think that is the next thing to look at but not sure:(

  • Mikecom32

    7 Posts

    1061

    0

    Posted September 16th, 2010 10:00

    Kenn,

    See the above excerpt from the manual.  Only the AX150 and AX150i have a UPS and UPS port, my AX150SCi does not.  That was my first thought after googling "write cache disabled", but then discovered both the AX150SC and AX150SCi do not have a UPS.

  • kenn2347

    4 Apprentice

    •

    542 Posts

    391

    0

    Posted September 16th, 2010 11:00

    Yes  that is the file but i would remove the link as that info should only be between you and support:)

    And i have not found a way to unmark and answered thrread:(