sushobhan

updated

14 years ago

S

sushobhan

14 Posts

0

1561

July 25th, 2012 10:00

Which version of DART supports IPv6?

Hi All,

I have the following questions -

  • Which version of DART supports IPv6?
  • Can I configure IPv4 & IPv6 IP in a Celerra Control Station?
  • Does Celerra support NAS clients with IPv4 and/or IPv6 IP address?

Thanks,

Sushobhan

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    730

    0

    Posted July 26th, 2012 00:00

    Release notes and manuals are on support.emc.com

    The Configuring and Managing Networking on VNX has information about IPv6

    VNX supports both IPv4 and IPv6 simultaneously by means of a dual IPv4/IPv6 protocol

    stack. Applications that support either IPv4 or IPv6 can run on the same network.

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    730

    0

    Posted July 25th, 2012 12:00

    Yes, the current release support Ipv6 – for some restrictions see the release notes

  • sushobhan

    14 Posts

    730

    0

    Posted July 25th, 2012 23:00

    Please elaborate. Are you talking about VNX by 'current release'? Where do I get release note?

    Thanks/Sushobhan

  • kajibade

    33 Posts

    730

    1

    Posted August 13th, 2012 05:00

    That is correct.

    IPv6 is not supported any v5.x.x version of DART.

  • sushobhan

    14 Posts

    730

    0

    Posted August 13th, 2012 05:00

    Thanks all for the info. I got the answers I was looking for.

    Regards,

    Sushobhan

  • sushobhan

    14 Posts

    730

    0

    Posted August 13th, 2012 05:00

    Hi All,

    Sorry, I got distracted by something else and got time to look at this just now.

    So...IPv6 is not supported any v5.x.x version of DART?

    Regards,

    Sushobhan