
UNSOLVED
Using rsync and migrate data to Celerra
Hi All,
I would like to migrate data using rsync from one linux server to Celerra (5.6) NFS.
1. Is it possible ?
2. If yes, how can i do to see rsync service running from Celerra side, and what is the users authentification method when using rsync ?
Thanks,
Responses (7)
Solutions (0)
Rainer_EMC
6 Operator
•
8645 Posts
910
0
Posted September 12th, 2011 08:00
Yes, just make sure that the fs is root exported to your Linux client
Reply Ok, thanks.
Just to make sure everything is clear;
I have a Linux client on which i will be mounting the NFS Export.
So,
1. after finish mounting exported file system on my data mover [Celerra(with nfs File system)]
# mount :/nfs /myLocalDir
2. i just need to setup the rsync deamon on source and on that Linux client.
3. send data to the rsync Linux client under the following scheme
sourcer_server ---> Linux Client (MyLocalDir)
/src_dir /myLocalDir
Thanks in advance,
Reply Rainer_EMC
6 Operator
•
8645 Posts
910
0
Posted September 12th, 2011 09:00
Sorry – I dont understand what you mean
If you rsync into a directory that’s mounted from the VNX then the data on the VNX will be updated
Reply

Rainer_EMC
6 Operator
•
8645 Posts
910
0
Posted September 12th, 2011 06:00
There is no rync server implemented on the Celerra data mover
You can however rsync to a Unix/Linix client that has NFS mounted the Celerra file systems
Rainer