UNSOLVED

dynamox

updated

19 years ago

D

dynamox

11 Legend

•

20419 Posts

•

87439 Points

0

597

July 31st, 2007 19:00

NDMP concurrent backups - greater than 4 ?

We are using TSM for our backup application so i was looking at Celerra NDMP backup configuration and it mentions that EMC does not recommend running more than 4 concurrent NDMP backups. I have a really old Celerra box (CFS-14), but was wondering if the restriction is still the same on the newer NS series ? I really have a need to run more concurrent backups, i have my CDL4100 connected to Celerra so i can present a couple more drives. I understand that it will have an impact on performance but since these backups are running at night i don't care if response time goes a little higher. I wish i could also utilize stand-by datamovers ..for something :)
  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    242

    0

    Posted August 2nd, 2007 07:00

    AFAIK it still is 4 concurrent NDMP jobs per data mover

    You could file a product enhancement request (PER) through Powerlink asking for more in a future release
  • squareahead

    12 Posts

    242

    0

    Posted August 14th, 2007 01:00

    if i have two streams from same filesystem that counts too ..in that case i can have only 2 filesystem can backup at time.
  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    242

    0

    Posted August 15th, 2007 12:00

    yes, that counts a 4 backups

    try if you really need two concurrent backups for one file system.

    NDMP backups are multi-threaded and there is some performance tuning possible so running two on one fs might not be faster than one.