emarzock1

updated

16 years ago

E

emarzock1

124 Posts

0

4751

January 6th, 2011 07:00

Forcing iSCSI LUN deletion on Celerra

We have a Celerra NX4, with new Unisphere, Dart 6 installed.  There are a few iSCSI LUNs on the Celerra that are no longer being used by any iSCSI clients, to the best of my knowledge.  LUN masks have been removed from them, etc.

However, I can't delete them.  DART insists that they are still in use.

What diagnostics can I run to determine what servers are still logged in and mapping those iSCSI volumes?  And, how can I force the Celerra to delete them if they are in fact not being used?

Thanks,

Eric

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    3044

    0

    Posted January 10th, 2011 10:00

    Force is good – but it wont work if these snaps are still promoted

  • Rainer_EMC

    6 Operator

    •

    8645 Posts

    2158

    1

    Posted January 6th, 2011 07:00

    Check if they still have checkpoints (snapshots)

    If not – please open a service request

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    2157

    0

    Posted January 6th, 2011 07:00

    are they replicated ?

  • emarzock1

    124 Posts

    2158

    0

    Posted January 6th, 2011 07:00

    Thanks for the quick reply, Rainer.

    Yes, I checked the checkpoints also.  None that I found.  I actually think that this may be the issue, and that there are some snaps that are somehow hidden from my view.

  • d.engamba

    16 Posts

    2157

    0

    Posted January 6th, 2011 08:00

    Hi,

    are they in a clone group?

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    2157

    0

    Posted January 6th, 2011 08:00

    clone group ? Celerra iSCSI LUNs ?

  • emarzock1

    124 Posts

    2157

    0

    Posted January 6th, 2011 08:00

    Thanks for the inquiry.

    No, they are not replicated.

  • chrisimes

    24 Posts

    2157

    1

    Posted January 6th, 2011 18:00

    Even if you aren't using Replication Manager, have a look at the following article:

    If you are (or were) using Replication Manager, versions prior to v5.2.4 and v5.3.0 would under certain circumstances leave behind some "phantom" snaps which, of course, eventually started taking up space on the filesystem and had to be manually identified and then cleaned up.  Even if you aren't running Replication Manager, it is still worth following the few steps to see if these are preventing you from deleting the iSCSI LUNs cleanly.

    FYI, in Replication Manager v5.3.0 (and also in v5.2.4), dev had rolled in some hotfixes after identifying the (known) conditions causing this.

  • emarzock1

    124 Posts

    2156

    0

    Posted January 7th, 2011 07:00

    Christopher,

    Thanks for this answer.  I will take a look, and let you know if this is the issue.  It is plausible, since RM is part of our environment here.

    Thanks,

    Eric

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    1194

    0

    Posted January 10th, 2011 09:00

    can you su to root and try again ( su  ..not su - )