UNSOLVED

kwiik

updated

11 years ago

K

kwiik

2 Posts

0

25274

September 30th, 2015 03:00

IOMs shutting down

We have an M1000e with 10 blades installed (2 M620 and 8 M610). Recently we have been getting problems with the IOMs suddenly shutting down.

Power Cycling through the CMC sometimes works but usually I have to physically remove and reinsert the IOM for it to restart and stay powered on. I have included the putty log which I can't really understand if that helps.

1 Attachment

  • 929

    0

    Posted July 29th, 2017 04:00

    You need to upgrade IOM firmware to resolve shutting down issue.