UNSOLVED

ava215

updated

14 years ago

A

ava215

6 Posts

0

2498

January 8th, 2013 21:00

DPN Summary report question

I believe that TotalBytes is the total size of data being protected, so this value for a certain client should always be getting bigger. I just found out that it is smaller than yesterday for one of my clients, did anything go wrong?

  • 1495

    1

    Posted January 9th, 2013 00:00

    Hello,

    Totalbytes is the number of bytes processed for the backup.

    Was there any change made to the dataset being used for backing up this client or was any data deleted on the client

  • ava215

    6 Posts

    1495

    0

    Posted January 9th, 2013 06:00

    It makes sense that Totalbytes is the number of bytes processed. Thank you Sandeep!

  • ava215

    6 Posts

    1495

    0

    Posted January 9th, 2013 09:00

    Another question, how can I get the number of bytes consumed by one client?

  • 1495

    0

    Posted January 10th, 2013 00:00

    You may use Backend capacity report to get the bytes consumed by one client.

    Backend capacity reports show detailed information about the amount of backend capacity consumed by one or more clients.

    Please refer to Avamar administration guide to know the procedure of setting up a Backend capacity report.

  • ava215

    6 Posts

    1495

    0

    Posted January 10th, 2013 06:00

    The admin guide says

    "Backend capacity" is the cumulative amount of client data that is currently being protected with no deduplication applied

    So it won't tell me exactly the bytes the client consumed on Avamar grid, right? Thanks!

  • J_H_

    2 Intern

    •

    498 Posts

    1495

    0

    Posted January 14th, 2013 09:00

    where is this Backend Capacity report?

  • 1495

    0

    Posted January 17th, 2013 03:00

    Hello ava215,

    Backend capacity report indicates how much data client is taking up on the GSAN for all of its combined backups, as if it were the only client.

    The data shown might be deduplicated with other clients, it doesn't distinguish between the data unique to the client and other clients on the GSAN.

  • 1495

    0

    Posted January 17th, 2013 03:00

    Hello J.H,

    Please refer to the section 'Creating a report' on page 227 of this document :

    https://support.emc.com/docu39176_Avamar_6.1_Administration_Guide.pdf?language=en_US

  • J_H_

    2 Intern

    •

    498 Posts

    1495

    0

    Posted January 18th, 2013 10:00

    I am either dumb or blind - because that is the first place I went when I read this post - but I still do not see anything that says backend capacity - and I cannot seem to figure out what report to run to see how much each server is using.