UNSOLVED

PetersonPS

updated

10 years ago

P

PetersonPS

1 Rookie

•

39 Posts

0

2846

October 28th, 2016 09:00

Avamar replication supported architecture?

Hello, my costumer has the following scenario.

SITEA: Avamar Virtual Edition + DataDomain

SITEB: DataDomain.

I would like to know if it is possible and supported, replicate the backups saved on DataDomain from SiteA to DataDomain in siteB. The desirable is to have only one AVE installed in SITEA.

Thanks in advance

  • ionthegeek

    2 Intern

    •

    2049 Posts

    2167

    1

    Posted October 29th, 2016 14:00

    As a rule, you generally need to replicate Avamar / DD to Avamar / DD. There are a few exceptions to this (for example the "Isolated Recovery Solution") but an Avamar system is required in order to actually perform restores.

  • umichklewis

    4 Apprentice

    •

    1190 Posts

    2170

    1

    Posted October 29th, 2016 15:00

    Any reason why you can't deploy AVE at Site B?  Depending on your licensing, you can deploy a recovery-only AVE at no cost, effectively.  Talk to your EMC Sales Team to figure out what your entitlements are.

    Let us know if that helps!

    Karl

  • PetersonPS

    1 Rookie

    •

    39 Posts

    2167

    0

    Posted October 29th, 2016 15:00

    Hi Karl, the reason for not deploy other AVE, is because the customer don`t has available space on storage.

  • ionthegeek

    2 Intern

    •

    2049 Posts

    2167

    0

    Posted November 3rd, 2016 08:00

    In short, this is not a supported configuration and could lead to serious problems.

  • ionthegeek

    2 Intern

    •

    2049 Posts

    2167

    0

    Posted November 3rd, 2016 08:00

    Also, MTree replication should NOT be configured directly on the Avamar MTree because it will replicate snapshots that will never be expired (Avamar is responsible for expiring its snapshots and it will not be aware of the copies). The buildup of snapshots will lead to the target DD filling up.

  • umichklewis

    4 Apprentice

    •

    1190 Posts

    2168

    0

    Posted November 3rd, 2016 08:00

    Well, as Ian put it - yes, you can replicate by not restore, since you have no Avamar instance at Site B.  So, sure you can accomplish your original goal, but won't have much in terms of disaster recovery.

  • ionthegeek

    2 Intern

    •

    2049 Posts

    2167

    0

    Posted November 8th, 2016 14:00

    A migration is a slightly different scenario from operational MTree replication. In a migration situation, the snapshots will be replicated, then when you swap out the old DD for the new one, Avamar maintenance will pick up right where it left off. If there's no Avamar on the target side, there will be nothing cleaning up the snaps on the target and it will eventually fill to capacity.

  • dynamox

    11 Legend

    •

    20419 Posts

    •

    87439 Points

    2167

    0

    Posted November 8th, 2016 14:00

    Ian Anderson wrote:

    Also, MTree replication should NOT be configured directly on the Avamar MTree because it will replicate snapshots that will never be expired (Avamar is responsible for expiring its snapshots and it will not be aware of the copies). The buildup of snapshots will lead to the target DD filling up.

    if I use Avamar /DD and i need to replace old DD with new DD ..i am replicating Avamar mtree from old DD to new DD. What am i missing ?