UNSOLVED

JimboEfx

updated

17 years ago

J

JimboEfx

6 Posts

0

1230

February 21st, 2010 08:00

Avamar 5 VE Capacity

Hi There,

I was wondering if someone can help me figure out how much capacity I have from a default AVE 5 1TB install.

This thread is much inspired by https://community.emc.com/message/336632

However I need something a bit more detailed, if you can help. Lets start:

ave_1tb_capacity.jpg

  • Total Capacity.

Some questions about how this:

681.7GB. Is 681.7 avaible for globally de-duped data? I gather the 1TB license is based on the decimal format based on information I have received:

" Avamar TB software capacity licenses are based on decimal TB capacity (e.g. a 2TB license entitles the storage of 2,000,000,000,000 bytes). This is in contrast to the display of capacity through Software interfaces such as Operating System or Avamar Administrator, which display binary (1024 byte "K's") capacity. "

So 1TB decimal works out to be 931GB binary (if my math is right). I was given some other general information:

" Standard practice for new Avamar implementations pre-v4.1 is to set the Read-Only limit to 60% until a HealthCheck is performed. The HealthCheck ensures the system will not have capacity problems once the limit is reset to the standard production limit of 65%. The HealthCheck and limit reset is performed by Avamar Support approximately 2-3 months after implementation. Until this is done, available capacities displayed will be based on the temporary initial limit. On a 2 TB node, this amounts to about 8% of capacity. So, make sure read-only is configured to 65%, which is now the default with the v4.1 release"

My diskreadonly is 40 percent if the below is to be believed.

root@adleman:~/#: avmaint config --ava | grep disk

  disknocreate="90"

  disknocp="96"

  disknogc="85"

  disknoflush="94"

  diskwarning="30"

  diskreadonly="40"

  disknormaldelta="2"

Looking at my partitions from the OS pov, it seems like there is only a small percentage used.


root@adleman:~/#: df -h
Filesystem            Size  Used Avail Use% Mounted on
/dev/sda5             7.9G  3.1G  4.5G  41% /
/dev/sda1             122M   14M  102M  12% /boot
none                  3.8G     0  3.8G   0% /dev/shm
/dev/sda9              37G  8.2G   27G  24% /space
/dev/sda8             1.5G   98M  1.4G   7% /var
/dev/sdb1             247G   53G  182G  23% /data01
/dev/sdc1             247G   53G  182G  23% /data02
/dev/sdd1             247G   53G  182G  23% /data03
/dev/sde1             247G   53G  182G  23% /data04
/dev/sdf1             247G   53G  182G  23% /data05
/dev/sdg1             247G   53G  182G  23% /data06












In the Server Management Node/Partition view 6 partitions of 113.6GB are listed.

The above quotes were from v4 documentation - is there an update for v5 which explains the values I am seeing. I suppose I just need someone to explain how do I get from 1.5TB provisioned disk space to 687GB available.

I also need to understand if I can get the full 1TB available to me (or 931GB) - if not how close do you get? Any real world examples out there?

  • Server utilization

What is this a percentage of exactly? e.g. Is this a percentage of the 1TB, or a percentage of the space available?

  • Hormigo

    2 Intern

    •

    131 Posts

    480

    0

    Posted February 22nd, 2010 07:00

    Hi,

    1- Please, what is AVAMAR Hardware?

    EX: DELL 2950, with 6 SATA disk of the 1TB, RAID 1 with 3 Virtual Disks.

    2- Single-Node our AVAMAR Virtual?

    Because I don´t know configurantion with 6 part.

    /dev/sdb1             247G   53G  182G  23% /data01
    /dev/sdc1             247G   53G  182G  23% /data02
    /dev/sdd1             247G   53G  182G  23% /data03
    /dev/sde1             247G   53G  182G  23% /data04
    /dev/sdf1             247G   53G  182G  23% /data05
    /dev/sdg1             247G   53G  182G  23% /data06

    Regards,

    Hormigo

  • JimboEfx

    6 Posts

    480

    0

    Posted February 22nd, 2010 09:00

    Hormigo wrote:

    Hi,

    1- Please, what is AVAMAR Hardware?

    EX: DELL 2950, with 6 SATA disk of the 1TB, RAID 1 with 3 Virtual Disks.

    2- Single-Node our AVAMAR Virtual?

    Because I don´t know configurantion with 6 part.

    /dev/sdb1             247G   53G  182G  23% /data01
    /dev/sdc1             247G   53G  182G  23% /data02
    /dev/sdd1             247G   53G  182G  23% /data03
    /dev/sde1             247G   53G  182G  23% /data04
    /dev/sdf1             247G   53G  182G  23% /data05
    /dev/sdg1             247G   53G  182G  23% /data06

    Regards,

    Hormigo

    This is the virtual edition running on ESX 3.5, so it has 6x250GB vmdks.