if i understand correctly cards over gtx1650 won't work due to lacking bios support.
what about 1070 and 1080?
CAN I USE A 2nd standard desktop PSU not connected to motherboard BUT only to power the graphics card to power a 1070 1080 card if the card size fits the x51 ?????
And what about amd cards? what generations are supported by bios if power was of no concern???
the on/off button only electrically connects wall power plug to psu. when you only connect psu to video card, that does not turn on psu. unless you connect the psu to another pc (or short two pins in its 24 ATX) and turn it on, you will not have any power out of it.
most psu have an on/ff button. i will just leave it always on or maybe off when the x51 turns off. it doesn't need to be in any case big or small, just a box lying around.
in my case the x51 is enclosed in a wooden space open infront and behind which would provide sufficient isolation and protection to both x51 and the psu
Here is an example of a dual psu adapter. Caveat, use at your own risk (I'm linking as an example of what other people use to accomplish what you ask but I'm not personally recommending it)
I realize your options are limited with an x51. But alienware does or did sell an external graphics amplifier for the x51 R3, people even run 2080ti in it. You can still find them all over the place still for sale, usually $100 to $150.
@SantaHugo "CAN I USE A 2nd standarddesktop PSU not connected to motherboard BUT only to power the graphics card to power a 1070 1080 card if the card size fits the x51 ?????
There actually is a cheap product to do this. It's called a dual power supply adapter. They run around $10, you can find them all over like amazon etc. You plug a molex from your old psu into the board and the 24 pin from the new psu into the board and the two act in tandem power on and off with the pc.
Caveat, though that I personally would not recommend having an external second psu setup via adapter especially for powering a powerful gpu.
Ah, I saw the R and 3 from your psu and thought you had an R3. Yeah, I think you're missing a required hookup for the AGA. SO wouldn't work on the older x51 unfortunately.
redxps630
11 Legend
•
16434 Posts
•
83185 Points
2055
0
Posted January 9th, 2021 10:00
the on/off button only electrically connects wall power plug to psu. when you only connect psu to video card, that does not turn on psu. unless you connect the psu to another pc (or short two pins in its 24 ATX) and turn it on, you will not have any power out of it.