UNSOLVED

Fnt1025

updated

6 years ago

F

Fnt1025

1 Rookie

•

21 Posts

0

4205

April 25th, 2021 06:00

How to enable Intel Adaptive Boost Technology (ABT) of i9-11900KF?

I am aware of this ABT option featured by the i9-11900KF. However, I am not able to find this option in my Aurora R12's BIOS. Any idea on where and how to enable it? 

Also, my memory got from Dell is 128G. The manual says it should be up to 3400MHz after XMP. But I am only able to get 3200MHz. My memory performance seems to be lower than expected. Any idea for that?vvhrg2pal8v61.jpgfzlns3pal8v61.jpg

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    2408

    0

    Posted April 25th, 2021 11:00

    You could run a small free program called CPU-Z. Under the Memory and SPD tabs it should show the available XMP profiles of your memory and what your memory is currently configured at.

     

    I ran the same benchmark on my R10 for a comparison against your score. I run aftermarket Corsair 3200 Mhz ram, 16 Gigabyte dual channel.

    Based on that comparison it looks like the score that takes a performance hit on yours is the memory threaded run.

    I get more than double your score for that 1 performance marker. The remainder seems to be around the same.  Definitely looks like something is off with multithreading on your configuration.

     

    Untitled.png

  • DexKen66

    1 Rookie

    •

    38 Posts

    2395

    0

    Posted April 25th, 2021 12:00

    Never heard of this benchmark before either, ran a test on my R10

    Screenshot 2021-04-25 202955.jpg

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    2399

    1

    Posted April 25th, 2021 12:00

    I ended up running the complete benchmark for a general comparison.

    It seems your SSD is performing well above mine, while the rest is fairly equal.

    Thanks for pointing me to that benchmark, I did not have this one in my collection yet.

     

    Untitled.png

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    2386

    0

    Posted April 25th, 2021 13:00

    Interesting, you both have more or less identical SSD benchmarks.

    Would you happen to know what brand of SSD is in your system, and could you post a picture of your SSD score tab "opened up"?

    I would like to compare with mine, see where I am dropping performance.

     

    I did a complete bench line when I got this system and took screen shots of all the results.

    I ran CrystalDiskMark benchmark again with the exact same version as original, and my scores are identical to when I got the machine.

    I can say for sure none of my tinkering has affected the bench and my R10 performs as per factory settings, at least for the SSD.

     

  • Fnt1025

    1 Rookie

    •

    21 Posts

    2326

    0

    Posted April 25th, 2021 20:00

    I replaced the 512G factory SSD (which is from SK Hynix) with a Sabrent Rocket 2TB. 

  • Fnt1025

    1 Rookie

    •

    21 Posts

    2320

    0

    Posted April 25th, 2021 21:00

    Thanks for directing me to this software. Here are the results. Any insights?

     

    CPU-Z-memory.pngCPU-Z-SPD.png

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    1471

    0

    Posted April 26th, 2021 03:00

    Memory wise that looks ok.

    You are running the XMP-3200 profile at 20-20-20-52 and 3200 Mhz, dual channel mode.

     

    I am assuming this is an Aurora R12?

  • 1475

    0

    Posted April 26th, 2021 04:00

    I have the i-9 10900kf and from what I read on Intel's website there is nothing to turn on for the ABT to work, it's automatic by default.   I would imagine the 11900KF is the same, but just research the specs and data sheet from Intel's website and you should be able to confirm this.   Also, on the CPU-Z utility or in Alienware Command Center (AWCC), you can see the settings for the CPU (I have mine set to a mild overclock from the AWCC options and run at 4.9Ghz on all cores and it has been stable with no problems).  As for the memory speed, 3200 mhz is near the top for these Dell Bios/Mobo's from what I have seen but if you paid Dell for their OEM memory sticks that were advertised at 3400 mhz then you should be able to get that.  However, I have seen posts that some users didn't get that speed from the factory setup as the Dell Bios option for that XMP setting was not turned on when it should have been at the factory.  You can see that if you log into the Dell Bios right at startup (google that, it's one of the Function keys that you hit as soon as it turns on but before the windows screen pops up) and inside the Bios there is are options/pages to see how the memory profile is set up and you may have to turn on the ability for the XMP profiles to be activated and one of them should get you to 3400mhz.  If you are not seeing that and paid for those RAM sticks from Dell, it's worth a support ticket to have someone remote in and check it out.  But, know that the difference between 3200mhz and 3400mhz isn't large from what I have read so don't expect a hugely noticeable difference.  

  • Fnt1025

    1 Rookie

    •

    21 Posts

    1461

    0

    Posted April 26th, 2021 04:00

    Yes. Aurora R12. 

    Spec:
    i9-11900KF / 128G RAM / RTX3090. 

    This machine will be more than a gaming machine. I will need to run some extensive computing tasks, which is why I concern about memory performance.

  • Vanadiel

    8 Professor

    •

    7094 Posts

    •

    29695 Points

    1068

    0

    Posted April 26th, 2021 06:00

     I just reread your original posting.

    The memory you have is 3200 Mhz as per the R12 FAQ R 12 FAQ 

     

    The part # for your memory modules is displayed in the CPU-Z screenshot: XVTW4H-MIE, which is VTW4H 32GB HyperX Fury XMP DDR4, 3200MHz, Unbuffered, 288 pin, Dual Rank, 1.25V, Non-ECC, Kingston XVTW4H-MIE

    In order to get 3400 Mhz you need memory part # 6TCK6 32GB HyperX Fury XMP DDR4, 3400MHz, Unbuffered, 288 pin, Dual Rank, 1.25V, Non-ECC, Kingston X6TCK6-MIE, X6TCK6-HYA

     

    I would give DELL a call, to check what memory option your machine is supposed to have as per your order. They can easily check this for you. It's always possible they accidentally provided the incorrect memory.