When i start my pc the fan goes 100% then the system realizes that it does not have any load just startup and goes quiet back again.
When i start a game like Hon which should be like fly in terms of load for the monster that i got my fans start to ramp up speed to the point of bothering me with my headphones on.
Is there an option in bios that i overlooked so I can manually set rpm limit to fans?
I already ordered and are on the way 2 fans Corsair ml 120 pro for top fan and a Noctua for front so i don't get bios failures.
I am preparing to add another gpu 2080 ti inside ...waiting on the nvdia 3 slot nvlink to arrive and since i started my documentation realizing that the case mid tower has lack of space and a lot of heat i am considering to remove my sata hard drive ( anyway i don't use it) to make more room and use less from power from psu all my sata bays and hopefully i won't have a barbecue inside.
All opinions on my current question and future plans (Sli nvlink 2080 RTX TI on R10 Ryzen edtion) are welcomed!
I am not running any games but my temps are still high and the fans are loud.... tooo loud anything i do in awcc like quiet mode does not help.... i mean is this normal in the pic below not running anything?
Hi there, I am curious to find out if you were able to solve your issue with the fans. I saw the pic you posted and I was so surprised to see that my machine (which i got two weeks ago) has been behaving in the exact same way since day one. Please let me know, I am sick of hearing those loud fans all the time! lol Oh, fyi, I have the 3950x, which is a beast, but of course also runs pretty hot. Thanks!
Noctua NF-A12x25 PWM, Premium Quiet Fan, 4-Pin (120mm, Brown) USB power adaptor cable allows the fan to run on devices with USB host ports, power banks or USB power supplies such as those used by smartphones
I tried switching the pins on the motherboard last night to see what happens, i.e. I hooked up the top fan to the CPU pin and vise versa. The temp on my cpu dropped by 20 degrees and PC is quiet, top fan never blows loudly. Also max cpu temps at 100% utilization dropped by 7 degrees. (This fan setup seems like bad engineering to me.)
I'm not sure if this will have any effect on the CPU fan, just something I tried for a little while. Anyone more knowledgeable about the fans (I'm assuming both are same voltage, but not certain.) can comment.
Alienware Aurora R10 NVIDIA GeForce RTX 2060 SUPER 8GB GDDR6 (OC Ready) AMD Ryzen(TM) 7 3700X (8-Core, 32MB L3 Cache, Max Boost Clock of 4.4GHz) Dark side of the moon chassis with Low-Profile Smart Cooling CPU Heatsink and 550W Power Supply 1TB M.2 PCIe NVMe SSD 16GB Dual Channel HyperX(FM) FURY DDR4 XMP at 2933MHz
The top fan was very loud once CPU utilization went above 15-20 %. Switching top fan / CPU fan pin connectors makes the system quieter at load. (I plugged the top fan into the CPU pin on the motherboard and vise versa.)
I don't know if it's advisable to switch the FAN pins, but solves the fan noise issue.
Looking for more experienced persons than me to comment.
r72019
8 Professor
•
5344 Posts
19339
1
Posted May 23rd, 2020 20:00
You can use Alienware Control Center (AWCC), thermal controls, to create your own fan curve.