After uninstall of Networker the nsrexecd service did not get removed. The service still shows in Windows services.
Uninstalled Networker software
Check Windows services for Networker Remote Exec service after uninstall. If the Networker Remote Exec service still shows then open an administrative command line and run the following command:
sc delete nsrexecd
You will see a message confirming the service is deleted or that service is awaiting deletion (requires reboot). After rebooting the computer, Install the Networker software.
FeiLei
79 帖子
2655
2
已发布 January 23rd, 2017 01:00
NW的排错,首先就是看DAEMON.RAW日志,后台日志是指明排查方向的标杆之一。尤其是在WINSOWS SERVER这类问题潜在因素众多的主机上。
另外,提问时建议把故障前后的操作说清楚,这样才能得到更高效的回复。仅此一张截图,问题方方面面,原因太多,也让答题者无从下手。
关于此类问题,若是DAEMON.RAW提示无法聚合端口,那么肯定是端口占用。建议TCPVIEWER查看下端口,另外检查下WINDOWS服务的端口范围,命令参考如下:
C:\>netsh int ipv4 show dynamicport tcp
Protocol tcp Dynamic Port Range
---------------------------------
Start Port : 1025
Number of Ports : 64510
如果发现了上述命令结果占用了NW的端口范围,最好修改一下,命令参考如下:
netsh int ipv4 set dynamicportrange tcp startport=1025 numberofports=64510
执行完后,需要重启