nickhe0811

已更新

10 years ago

已解决!

前往解决方案
N

nickhe0811

10 帖子

0

7151

December 19th, 2016 18:00

networker备份linux操作系统上的文件,报如下错误

使用networker 8.2备份linux操作系统上的文件/database/dbdata/sycc_app/apps/settlesrv/backup

在日志内容中有如下内容

92800 2016/12/10 19:10:17  2 5 0 1648 7184 0 nwserver savegrp NSR warning 无法确定作业 957、SYCC-DB:/database/dbdata/sycc_app/apps/settlesrv/backup 的状态:找不到日志文件“C:\Program Files\EMC NetWorker\nsr\logs\sg\file_back\957”。

数据是都备份过去了,在备份介质上也可以看得到。但是最后还是现实报错信息在监控界面上,显示备份失败

  • FeiLei

    79 帖子

    6336

    0

    已发布 December 28th, 2016 00:00

    92800 2016/12/21 19:10:17  2 5 0 4108 4996 0 nwserver savegrp NSR warning 无法确定作业 1364、SYCC-DB:/database/dbdata/sycc_app/apps/settlesrv/backup 的状态:找不到日志文件“C:\Program Files\EMC NetWorker\nsr\logs\sg\file-backup\1364”。



    关于上面这个告警,其实是sg日志当时无法打开或者已删除,所以才有告警。

    一般这个告警不会对备份成败有影响,它只是来反馈这个存储集当时的备份情况,NMC没有读取到这个sg日志所以告警了。


    sg日志里面会记录备份的一些信息,类似于备份的临时记录员,备份在运行的时候记录备份的情况,备份完了过一段时间就清除了。


    关于sg的这个设置,暂时在NMC上没有找到配置地方。如果有同仁知道如何配置,请告知,谢谢。

  • Roger_Wu

    6 Operator

    •

    4025 帖子

    6336

    1

    已发布 December 20th, 2016 01:00

    这条错误信息的前后日志可以贴更多上来吗?此信息对应的英文错误是“savegrp: Unable to determine status for job *****: Log file ***** not found.” ,其实对应着多条KB,由于您只有这一条错误信息,不太难判断到底是哪种问题。有账号的话可以自己在EMC支持站点support.emc.com上查询看看。


    另外NetWorker 8.2 Error Message Guide里也有提到Cannot determine status of the backup process时的一般处理方法:

    Description

    The backup of the specified save set might be complete.

    • There has not been any status reported from the client-side program. This problem might occur when:
    • The network connection between the client and server was lost during the backup session.
    • The disk on which the client status is logged is full. By default, the client status is maintained in this directory:
      • UNIX: /nsr/logs
      • Windows: %SystemDrive%\Program Files\Legato\nsr\logs
      • NetWare: SYS:\NSR\logs
    • The NetWorker Module binaries are not installed on the database server.
    • Save group parallelism has been set to a non-zero value for some backup groups.

    Resolution

    Complete one or more of these tasks to resolve this error:

    • Use mminfo -v -c (client_name) -t (time) to determine whether the save set was backed up successfully. The mminfo report shows completion status in the Flags column. An “a” flag means the backup was aborted.
    • Use ping to verify that the network protocols are functioning properly.
    • Determine whether the drive containing the log file is full:
      • UNIX: Run df /nsr/tmp.
      • Windows: Right-click the drive where NetWorker software is installed and select Properties.
    • Verify that all relevant NetWorker Module binaries are installed on the database server.
    • Set the Save Group Parallelism attribute for all save groups to 0 (zero).
  • KevinTeng

    11 帖子

    6336

    1

    已发布 December 20th, 2016 15:00

    可以尝试先将 客户机, 服务器 和存储节点上的 tcp_keepalive_time 调整成 300 秒。再测试备份。

  • ERic18

    56 帖子

    6336

    1

    已发布 December 20th, 2016 15:00

    这个是记录备份的日志文件,显示找不到应该是没有更新,不影响备份,可以将备份组的级别设置为‘错误’,这样‘警告’信息会不影响备份结果。这样状态就能显示成功

  • nickhe0811

    10 帖子

    6336

    0

    已发布 December 21st, 2016 20:00

    谢谢各位

    以下是关于这个备份的日志信息

    71193 2016/12/21 17:10:00  0 0 0 8428 6768 0 nwserver nsrd NSR info 保存组 信息: Added 'nwserver' to the group 'file-backup' for bootstrap backup

    77560 2016/12/21 17:10:00  0 0 2 4108 4996 0 nwserver savegrp NSR info Added 'nwserver' to the group 'file-backup' for bootstrap backup

    71193 2016/12/21 17:10:00  0 0 0 8428 6768 0 nwserver nsrd NSR info 保存组 信息: 正在启动组“file-backup”,该组有 2 个客户端。

    71193 2016/12/21 17:10:01  0 0 0 8428 6768 0 nwserver nsrd NSR info 保存组 信息: Unable to find any full backups of the save set 'SYCC-DB:/database/dbdata/sycc_app/apps/settlesrv/backup' in the media database. Performing a full backup. 

    128137 2016/12/21 17:10:06  0 0 2 4108 4996 0 nwserver savegrp NSR info Group file-backup waiting for 1 jobs (0 awaiting restart) to complete.

    71193 2016/12/21 17:10:06  0 0 0 8428 6768 0 nwserver nsrd NSR info 保存组 信息: Group file-backup waiting for 1 jobs (0 awaiting restart) to complete. 

    70896 2016/12/21 17:10:07  0 0 2 8428 6768 0 nwserver nsrd NSR info SYCC-DB01:/database/dbdata/sycc_app/apps/settlesrv/backup 正在保存到池“Default”(001) 

    82327 2016/12/21 17:51:17  1 9 0 4940 5984 0 nwserver nsrjobd JOBS notice 正在启动作业数据库的 full 清除

    93514 2016/12/21 17:51:17  1 9 0 4940 5984 0 nwserver nsrjobd JOBS notice 在 0 分 1 秒内完成 full 数据库清除 。记录已清除:12

    71659 2016/12/21 18:29:39  0 0 2 8428 6768 0 nwserver nsrd NSR info SYCC-DB01:/database/dbdata/sycc_app/apps/settlesrv/backup 已保存到池Default(001) 14 GB

    67898 2016/12/21 18:30:16  1 0 0 8428 6768 0 nwserver nsrd NSR notice 正在为主机 nwserver 上使用带有卷  的设备 nw_dev 的 mmd 279286786 调用 mm_deactivate

    71193 2016/12/21 18:30:16  0 0 0 8428 6768 0 nwserver nsrd NSR info 写入完成 注意: 写入卷 001 已完成

    82327 2016/12/21 18:51:19  1 9 0 5240 5984 0 nwserver nsrjobd JOBS notice 正在启动作业数据库的 full 清除

    93514 2016/12/21 18:51:19  1 9 0 5240 5984 0 nwserver nsrjobd JOBS notice 在 0 分 1 秒内完成 full 数据库清除 。记录已清除:0

    92800 2016/12/21 19:10:17  2 5 0 4108 4996 0 nwserver savegrp NSR warning 无法确定作业 1364、SYCC-DB:/database/dbdata/sycc_app/apps/settlesrv/backup 的状态:找不到日志文件“C:\Program Files\EMC NetWorker\nsr\logs\sg\file-backup\1364”。

    90491 2016/12/21 19:10:17  1 5 0 4108 4996 0 nwserver savegrp NSR notice SYCC-DB:/database/dbdata/sycc_app/apps/settlesrv/backup unexpectedly exited。

  • Roger_Wu

    6 Operator

    •

    4025 帖子

    6336

    0

    已发布 December 21st, 2016 23:00

    楼上两位都是NetWorker专家,您可以先照着他们的建议操作看看。

  • nickhe0811

    10 帖子

    6336

    0

    已发布 December 22nd, 2016 06:00

    多谢各位了。

    还有个现象。就是备份同一个客户端的其他文件和文件夹是没有任何问题的。

    同时,该客户端上还有oracle的数据库备份也没问题。

    就这个目录

    /database/dbdata/sycc_app/apps/settlesrv/backup

    备份报错。在备份过程中,这个目录的数据是没有更新,也没有其他程序访问的。