I know this has been asked before but does anyone have a script that can run on a windows SE host to loop through and pull all of the host capacity info?
I have a script that will produce a report showing capacity information for each Storage Group in a VMAX -- I haven't tested this on Windows, but it might be a good starting point for you. You'll need to have Python installed on your host (version 2.7.6 should work), along with the 'prettytable' Python module. I generally run this from an offline host (see Offline SYMCLI Commands).
symaccess -sid XXX list -type storage -detail / symsg list ( if you device sizes is same you can get the details by using any of the commands)
Else :- Please use Unisphere for VMAX ( in the array you will have option to get the consolidated report for all the storage groups along with the capacity/storage assigned to them)
Zhang_Jiawen
2 Intern
•
1161 Posts
2450
1
Posted October 14th, 2014 20:00
symmaskdb list capacity -host
will give the entire list.You can put script on this and you get your results.