UNSOLVED

green2233

updated

21 years ago

G

green2233

5 Posts

0

12120

January 25th, 2005 01:00

Hard Drive died (I think) Inspiron 7500. Can I use a USB connected Hard Drive?

I have an Inspiron 7500 Laptop, about 5 years old now. My Hard Drive started making a loud clicking noise, as if was stuck,  and the screen froze. When I rebooted, I got the message "Operating System not found". No amount of diagnostics could resolve and the Start up disk can't seem to locate any fixed drive so I'm resigned to the fact that the Hard Drive has died. Dell dont support this model any more so I cant get a replacement drive. I've seen quite a few external HDD's advertised on Ebay which plug in via the USB. Are these compatable with my Inspiron?
 
Just to complicate things, the internal CD Rom stopped working a few months ago so I've been using an external CD Drive. Would this complicate re-loading the operating system?
 
  • green2233

    5 Posts

    178

    0

    Posted January 25th, 2005 03:00

    I'll give that a try. Thanks for your time and feedback.
  • johnallg

    2 Intern

    •

    7280 Posts

    178

    0

    Posted January 25th, 2005 03:00

    I would put the drive in a ziplok bag and in the freezer overnight.  When you pull it out, be ready to back it up or even ghost/image it.  You can use any drive in the 7500 that is a 2.5" notebook drive.
  • HMKrieps

    713 Posts

    178

    0

    Posted January 26th, 2005 12:00

    As johnallg suggested, any 2,5" IDE Harddrive can be used in your Inspiron. They should be sold in every computer store.

    I doubt that your old Inspiron is able to boot from a USB CDROM, so the fact that your internal CDROM is dead will complicate the installation process. As I doubt that there are DOS drivers available to support the USB CDROM from a boot disk. One possibility would be to connect the new HDD on another computer using a 2,5 to 3,5" adaptor, copy the installation files on your HDD, put it in your Inspiron, boot from diskette and start the installation.
  • RE_

    15 Posts

    178

    0

    Posted August 18th, 2005 06:00


    @HMKrieps wrote:
    ...One possibility would be to connect the new HDD on another computer using a 2,5 to 3,5" adaptor, copy the installation files on your HDD, put it in your Inspiron, boot from diskette and start the installation.



    I tried this step last year, but it didn't work. If you connect your notebook HDD to a desktop to format it, the desktop controller will use a different disk geometry than the Inspiron controller. There will be different values of cylinders, heads and sectors. You can format (and perfectly use) your new HDD at your desktop, but later it will not boot in the Inspiron 7500!

    You have to do the following:
    1) Boot an imaging tool from CDRom. The best tool for this (and your Inspiron ;-) ) is TrueImage (V7 or V8) from Acronis. I made several images and restore operations with my Inspiron 7500 with no problems. Norton Ghost did not work that perfect.
    2) Make an image of your current disk to a network drive (shared disk, server,...). You need a network adapter (Cardbus or Advanced Docking Station, a WLAN probably doesn't work at this level)
    3) Remove the old internal HDD and insert the new one (in the main HDD bay)
    4) Boot the imaging tool again from CDRom
    5) Restor your image from the network drive. TrueImage allows you to change partition sizes before starting to restore, if the new HDD is bigger than the old one
  • RE_

    15 Posts

    178

    0

    Posted August 18th, 2005 07:00

    An elder thread about this subject:

    http://forums.us.dell.com/supportforums/board/message?board.id=insp_harddrive&message.id=31891&view=by_date_ascending&page=2

    Sorry, I don't know how to post a correct link ;-)