UNSOLVED
C
Christian4
30 Posts
0
893
September 21st, 2011 02:00
Dynamic Model: Define own thresholds settings
Is there a way how I can configure own thresholds settings within IP domain with Dynamic Modelling.
As far as I can see the parent class is ICF_Setting. I tried with following:
interface System_SC_Nexus_Performance:ICF_Setting{
/* some thresholds */
}
After compiling and restarting the domain I could not select anymore the settings to add them to a threshold group.
The same thing I did for Polling. There it works. Following code does it:
interface System_SC_NetSNMP:ICF_PollingSetting{
/* some thresholds */
}
Regards,
Christian
Christian4
30 Posts
276
0
Posted September 22nd, 2011 21:00
The answer is:
interface System_SC_Nexus_Performance:ICF_Setting{
/* some thresholds */
refine stored Type = "THRESHOLD";
}
Regards,
Christian
Example of threshold and polling setting
interface Bras_Dhcp_PPPoE_Polling_Setting : ICF_PollingSetting {
refine stored DisplayName = "description";
refine stored RuleSet = "xSettings/xBras_Dhcp_PPPoE-setting.asl";
refine stored TargetClass = "ICIM_UnitaryComputerSystem";
};
//Threshold Settings
interface Bras_Dhcp_PPPoE_Setting : ICF_Setting {
refine stored DisplayName = "Monitoring of Bras sessions";
refine stored TargetClass = "ICIM_UnitaryComputerSystem";
attribute unsigned [0 .. 128000] HighThreshold
"High threshold"
= 1000;
attribute unsigned [0 .. 128000] LowThreshold
"Low threshold"
= 10;
attribute unsigned [0 .. 128000] DeltaThreshold
"Delta threshold"
= 100;
};
kfosburg
1 Rookie
•
18 Posts
276
0
Posted September 22nd, 2011 07:00
The short answer is Yes, but it's not trivial. I will attempt to post a series over the next week on a step by step process...
Karl