UNSOLVED

Bear1212

updated

7 years ago

B

Bear1212

1 Message

0

1955

May 31st, 2019 07:00

Dell Precision 5530 imaging issues

I need help with an issue I am experiencing with my Precision 5530. After receiving the laptopswe proceed to install an enterprise edition of Windows 10 LTSC. I use the UEFI option to install the OS and everything works great. When done creating the image to capture and set it up the way we need it, we use Ghost 3.1. Once I boot to Ghost (using the UEFI boot method) I am prompted to select the partition to install the image. And here is where I run into issues. Ghost only sees the USB I am using to boot Ghost as the only available partition to restore or capture the image. It is almost as if using the UEFI boot method hides the laptop partitions. Also I am disabling the secure boot option just to make sure that it works. I have used the legacy boot but installing a new OS using this method is a nightmare (and also, it doesn't work - same issue). Can I please get any suggestions/guidance/advice on how to deal with this?

thanks.

  • speedstep

    11 Legend

    •

    46969 Posts

    1836

    0

    Posted May 31st, 2019 09:00

     

    Neither Dell nor Microsoft support 3rd party software like Ghost.

    Ghost will not see any drives if the mass storage drivers for NVME and or INTEL RST, Chipset,  USB3 etc are not there.

     

    x64storage

    LSI SAS 2308/9217 Controller Driver

    ReleaseID: MW17D
    DellVersion: A00
    VendorVersion: 2.00.66.02
    ReleaseID: MW17D
    DellVersion: A00
    VendorVersion: 2.00.66.02

    No Change

    x64storage

    Intel Rapid Storage Technology enterprise Driver and Management Console

    ReleaseID: TVKCC
    DellVersion: A03
    VendorVersion: 5.3.1.1019
    ReleaseID: TVKCC
    DellVersion: A03
    VendorVersion: 5.3.1.1019

    No Change

    x64storage

    Intel Rapid Storage Technology Driver and Management Console

    ReleaseID: F2JN7
    DellVersion: A02
    VendorVersion: 15.2.2.1030
    ReleaseID: F2JN7
    DellVersion: A02
    VendorVersion: 15.2.2.1030

    No Change

    x64storage

    Intel Rapid Storage Technology enterprise Driver and Management Console

    ReleaseID: MTWV3
    DellVersion: A01
    VendorVersion: 5.2.0.1215
    ReleaseID: MTWV3
    DellVersion: A01
    VendorVersion: 5.2.0.1215

    No Change

    x64storage

    Intelr Rapid Storage Technology Enterprise F6 Driver

    ReleaseID: 6DD29
    DellVersion: A00
    VendorVersion: 4.3.0.1198
    ReleaseID: 6DD29
    DellVersion: A00
    VendorVersion: 4.3.0.1198

    No Change

    x64storage

    LSI 3008 Drivers for Windows 8.1 - 64 bit

    ReleaseID: RJP27
    DellVersion: A00
    VendorVersion: 2.50.75.01
    ReleaseID: RJP27
    DellVersion: A00
    VendorVersion: 2.50.75.01

    No Change

    x64storage

    Intel Rapid Storage Technology Driver and Management Console

    ReleaseID: 7C7CH
    DellVersion: A09
    VendorVersion: 12.9.0.1001
    ReleaseID: 7C7CH
    DellVersion: A09
    VendorVersion: 12.9.0.1001

    No Change

    x64storage

    Intel Rapid Storage Technology Driver and Management Console

    ReleaseID: T7DJK
    DellVersion: A00
    VendorVersion: 14.5.2.1088
    ReleaseID: T7DJK
    DellVersion: A00
    VendorVersion: 14.5.2.1088

    No Change

    x64storage

    Intel Rapid Storage Technology Driver and Management Console

    ReleaseID: KFRJ3
    DellVersion: A01
    VendorVersion: 16.0.2.1086
    ReleaseID: KFRJ3
    DellVersion: A01
    VendorVersion: 16.0.2.1086

    No Change

    x64storage

    LSI 9440-8i/9460-16i drivers for Windows 10 - 64 bit

    ReleaseID: T47PJ
    DellVersion: A01
    VendorVersion: 7.702.12.0
    ReleaseID: T47PJ
    DellVersion: A01
    VendorVersion: 7.702.12.0

    No Change

    https://www.dell.com/support/article/us/en/04/sln312414/dell-command-deploy-driver-packs-for-enterprise-client-os-deployment?lang=en

    You have to download the single cab files then extract them using 7zip so that windows can "see"

    If extracted into the documents folder for all users it will not need to be online to see things.

    WinPE - CAB Availability (follow the links for CAB details and to download)

    https://www.7-zip.org/download.html

    WinPE versionCurrent CAB

    WinPE 10

    A11 (04/30/2019)

     

    Mass Storage F6 drivers RequiredMass Storage F6 drivers Required

     

     

     

     

     

     

     

     

     

    NONE of the new Dell models support Legacy Boot.

    GPT UEFI is required now as is 64 bit os.

    Starting from Ghost Solution Suite3.0HF2,Symantec Ghost Solution Suite supports Windows 10 with limitations

    https://symwisedownload.symantec.com//resources/sites/SYMWISE/content/live/DOCUMENTATION/9000/DOC9010/en_US/Windows10_fullsupport_statement_GSS.pdf