G'day Suriya. If you mean the ScaleIO system analysis reporting feature, then downtime is not required. However, note that this feature is invoked from the ScaleIO installation manager interface.
There is no reporting tool as such, provided with ScaleIO. However, ScaleIO can be configured so that the MDM sends messages to a syslog server. You can configure this during installation using the Installation Manager, or after installation using the CLI interface. A background device scanner is provided with ScaleIO. Both of these features are described in the ScaleIO User Guide. There is a ScaleIO documentation hub at EMC Community Network - DECN: ScaleIO Documentation Hub where you will find all of the product documentation.
I do not know enough about "snap mail" to be able to tell you how to configure it. You can configure SNMP trap properties after deployment as part of the ScaleIO Gateway. The SNMP trap sender provides a proprietary MIB, scaleio.mib, on the gateway server. The SNMP feature is disabled by default. Additional information on the SNMP/trap feature is available in the ScaleIO User Guide at the documentation hub.There might be a way to configure "snap mail" on the trap receiver to react to SNMP traps when they are received.
Suriya_007
54 Posts
835
0
Posted June 21st, 2017 22:00
Thanks for your response sir....
could you please let me know is there any reporting tool for this scaleio...
and how can we configure snap mail alert for scaleio..
Thanks in advance.
Suriya M